How do I change from IPV4 to IPV6

How do i change from IPv4 to IPv6?

Intel and fast

To enable IPV6, your internet provider has to support it. If your internet provider does not support it, then there is no way to enable it.

Hi,! I'm Luis, a fellow Xbox Gamer . Thanks for reaching us out here.

For Xbox to connect to the internet using IPv6, your home router needs to have IPv6 enabled, and your internet service provider (ISP) must support IPv6.

Here’s how to check if your xbox is using IPv6:

Press the Xbox button  on your controller to open the guide.

Select Profile & system > Settings > General.

Select Network settings.

If your Xbox console has IPv6 connectivity, your Current Network Status will read IPv4 & IPv6. (To see your actual IP and gateway addresses, select Advanced settings.)

VirginMedia (Modems/Gateways): how do i switch from ipv4 to ipv6?
IPv6 support was removed as part of the “upgrade” 🙁

first you need to make sure your ISP is supporting ipv6 and has it set up. If they do, you have to call them and tell them you want IPv6 turned on for you. Once they do that, you can go into your router, and with most routers you have to run native or a
combo of IPv4 and IPv6, because most software and stuff isnt running totally on ipv6 and wont be for awhile. Once you turn that on your router, your xbox will automatically recognize the IPv6 and it should say "IPv4 and IPv6" .

Depending on your router or your isp, i wouldnt recommend going with IPv6, i have noticed a decrease in my bandwidth on xbox. They might say you will see good changes, but i dont think so yet. Plus on your PC or what not, if you watch streams online, alot
of places recommend not using ipv6, it could mess with there device players. All little stuff, but it does add up. IPv6 will be great once its fully implented and everyone is on it.