Hitron: Overview

Discus and support Hitron: Overview in XboX Networking Hardware to solve the problem; Hitron (Modems/Gateways): Overview Hitron CGN2 Login Information: Default Gateway – 192.168.1.1 Username – cusadmin Password – login How... Discussion in 'XboX Networking Hardware' started by XBR Poseidon, Dec 15, 2014.

  1. XBR Poseidon
    XBR Poseidon Guest

    Hitron: Overview


    Hitron (Modems/Gateways): Overview
    Hitron CGN2

    Login Information:

    Default Gateway – 192.168.1.1

    Username – cusadmin

    Password – login







    How to Find SSID (Network Name)

    1. Open a web browser.
    2. Enter http://192.168.1.1 in the address bar and press enter.
    3. Enter “cusadmin” for the username and “admin” for the password when prompted.
    4. Select Wireless from the menu on the left.
    5. Select Basic Settings from the tabs at the top.
    6. The SSID (Network Name) can be found in the center column of the Wireless Information table.


    How To Find Wireless Passphrase (WPA/WEP)

    1. Open a web browser.
    2. Enter http://192.168.1.1 in the address bar and press enter.
    3. Enter “cusadmin” for the username and “admin” for the password when prompted.
    4. Select Wireless from the menu on the left.
    5. Select WPS&Security from the tabs across the top.
    6. The Wireless Passphrase can be found in the Pre-shared key space.


    Alt. Instructions.

    1. Locate the sticker on the bottom of the device.
    2. The passphrase for your wireless network is listed to the right of Network Key(Password).


    Changing Wireless Security Type/ Disabling Wireless Security

    1. Open a web browser.
    2. Enter http://192.168.1.1 in the address bar and press enter.
    3. Enter “cusadmin” for the username and “admin” for the password when prompted.
    4. Select Wireless from the menu on the left.
    5. Select WPS&Security from the tabs across the top.
    6. Select None from the Security Mode drop down.
    7. Click the Apply button at the bottom of the screen.


    MAC Filtering

    1. Open a web browser.
    2. Enter http://192.168.1.1 in the address bar and press enter.
    3. Enter “cusadmin” for the username and “admin” for the password when prompted.
    4. Select Wireless from the menu on the left.
    5. Select Access Control from the tabs across the top.
    6. Select Allow-All from the MAC Filtering Mode dropdown.
    7. Click the Apply button.


    Change Wireless Mode

    1. Open a web browser.
    2. Enter http://192.168.1.1 in the address bar and press enter.
    3. Enter “cusadmin” for the username and “admin” for the password when prompted.
    4. Select Wireless from the menu on the left.
    5. Select Only 11G from the Wireless Mode drop down.
    6. Click the Apply button.




    Change Wireless Channel

    1. Open a web browser.
    2. Enter http://192.168.1.1 in the address bar and press enter.
    3. Enter “cusadmin” for the username and “admin” for the password when prompted.
    4. Select Wireless from the menu on the left.
    5. Select the desired wireless channel from the Channel drop down. (Channels 1,3,9,11)
    6. Click the Apply button.


    DHCP Reservation

    *Not Available*





    UPnP

    1. Open a web browser.
    2. Enter http://192.168.1.1 in the address bar and press enter.
    3. Enter “cusadmin” for the username and “admin” for the password when prompted.
    4. Select Status from the tabs across the top.
    5. Select Capability from the menu on the left.
    6. Check or uncheck UPnP depending on your situation.
    7. Click the Apply button.


    DMZ

    1. Open a web browser.
    2. Enter http://192.168.1.1 in the address bar and press enter.
    3. Enter “cusadmin” for the username and “admin” for the password when prompted.
    4. Select Firewall.
    5. Select DMZ.
    6. Check the Enable DMZ Host box.
    7. Click the Connected Computers button.
    8. Select your Xbox console from the available devices.
    9. Click the Apply button.


    Disable DMZ

    1. Open a web browser.
    2. Enter http://192.168.1.1 in the address bar and press enter.
    3. Enter “cusadmin” for the username and “admin” for the password when prompted.
    4. Select Firewall.
    5. Select DMZ.
    6. Unheck the Enable DMZ Host box.
    7. Click the Apply button.


    Port Forwarding

    1. Open a web browser.
    2. Enter http://192.168.1.1 in the address bar and press enter.
    3. Enter “cusadmin” for the username and “admin” for the password when prompted.
    4. Select Firewall.
    5. Select Forwarding.
    6. Click the add new button.
    7. Enter a name that describes Xbox.
    8. Select TCP/UDP from the protocol drop down.
    9. Set both the Public Port Range and Private Port Range to 3074.
    10. Click the Connected Computers button.
    11. Select your Xbox console from the list of devices.
    12. Click the Apply button.
    13. Click the add new button.
    14. Enter a name that describes Xbox.
    15. Select UDP from the protocol drop down.
    16. Set both the Public Port Range and Private Port Range to 3544.
    17. Click the Connected Computers button.
    18. Select your Xbox console from the list of devices.
    19. Click the Apply button.
    20. Click the Apply button.


    Disable Port Forwarding

    1. Open a web browser.
    2. Enter http://192.168.1.1 in the address bar and press enter.
    3. Enter “cusadmin” for the username and “admin” for the password when prompted.
    4. Select Firewall.
    5. Select Forwarding.
    6. Check the box next to any Xbox rules.
    7. Click the Delete button.


    Firewall

    *The firewall does not have any adjustable options.*



    Restoring Factory Defaults

    Through Firmware

    1. Open a web browser.
    2. Enter http://192.168.1.1 in the address bar and press enter.
    3. Enter “cusadmin” for the username and “admin” for the password when prompted.
    4. Select WAN/LAN.
    5. Select Backup.
    6. Click the Factory button.


    Through Hardware

    1. Locate the reset button on the back of the device.
    2. Press and hold the reset button for aprox. 5 seconds.
    3. Release the button and wait for the device to restart.


    How to Find Firmware Version

    1. Open a web browser.
    2. Enter http://192.168.1.1 in the address bar and press enter.
    3. Enter “cusadmin” for the username and “admin” for the password when prompted.
    4. Select Status.
    5. Select System Info.




    Firmware Update

    *Firmware updates are handled by ISP*





    Bridging Guide

    1. Open a web browser.
    2. Enter http://192.168.1.1 in the address bar and press enter.
    3. Enter “cusadmin” for the username and “admin” for the password when prompted.
    4. Select Status.
    5. Select Capability.
    6. Uncheck the Resaidential Gateway Function check box.
    7. Click the Apply button.




    Multiple Console Support

    We have confirmed that this network device is unable to support more than one console with an Open NAT.



    Known Issues

    Limited reports of frequent disconnections on Xbox 360, no known resolution at this time.

    Device Manual

    Click
    here     for the manual.

    :)
     
    XBR Poseidon, Dec 15, 2014
    #1
  2. XBR Poseidon
    XBR Poseidon Guest
    Hitron: Overview

    Hitron (Modems/Gateways): Overview
    Hitron CGN2

    Login Information:

    Default Gateway – 192.168.1.1

    Username – cusadmin

    Password – login







    How to Find SSID (Network Name)

    1. Open a web browser.
    2. Enter http://192.168.1.1 in the address bar and press enter.
    3. Enter “cusadmin” for the username and “admin” for the password when prompted.
    4. Select Wireless from the menu on the left.
    5. Select Basic Settings from the tabs at the top.
    6. The SSID (Network Name) can be found in the center column of the Wireless Information table.


    How To Find Wireless Passphrase (WPA/WEP)

    1. Open a web browser.
    2. Enter http://192.168.1.1 in the address bar and press enter.
    3. Enter “cusadmin” for the username and “admin” for the password when prompted.
    4. Select Wireless from the menu on the left.
    5. Select WPS&Security from the tabs across the top.
    6. The Wireless Passphrase can be found in the Pre-shared key space.


    Alt. Instructions.

    1. Locate the sticker on the bottom of the device.
    2. The passphrase for your wireless network is listed to the right of Network Key(Password).


    Changing Wireless Security Type/ Disabling Wireless Security

    1. Open a web browser.
    2. Enter http://192.168.1.1 in the address bar and press enter.
    3. Enter “cusadmin” for the username and “admin” for the password when prompted.
    4. Select Wireless from the menu on the left.
    5. Select WPS&Security from the tabs across the top.
    6. Select None from the Security Mode drop down.
    7. Click the Apply button at the bottom of the screen.


    MAC Filtering

    1. Open a web browser.
    2. Enter http://192.168.1.1 in the address bar and press enter.
    3. Enter “cusadmin” for the username and “admin” for the password when prompted.
    4. Select Wireless from the menu on the left.
    5. Select Access Control from the tabs across the top.
    6. Select Allow-All from the MAC Filtering Mode dropdown.
    7. Click the Apply button.


    Change Wireless Mode

    1. Open a web browser.
    2. Enter http://192.168.1.1 in the address bar and press enter.
    3. Enter “cusadmin” for the username and “admin” for the password when prompted.
    4. Select Wireless from the menu on the left.
    5. Select Only 11G from the Wireless Mode drop down.
    6. Click the Apply button.




    Change Wireless Channel

    1. Open a web browser.
    2. Enter http://192.168.1.1 in the address bar and press enter.
    3. Enter “cusadmin” for the username and “admin” for the password when prompted.
    4. Select Wireless from the menu on the left.
    5. Select the desired wireless channel from the Channel drop down. (Channels 1,3,9,11)
    6. Click the Apply button.


    DHCP Reservation

    *Not Available*





    UPnP

    1. Open a web browser.
    2. Enter http://192.168.1.1 in the address bar and press enter.
    3. Enter “cusadmin” for the username and “admin” for the password when prompted.
    4. Select Status from the tabs across the top.
    5. Select Capability from the menu on the left.
    6. Check or uncheck UPnP depending on your situation.
    7. Click the Apply button.


    DMZ

    1. Open a web browser.
    2. Enter http://192.168.1.1 in the address bar and press enter.
    3. Enter “cusadmin” for the username and “admin” for the password when prompted.
    4. Select Firewall.
    5. Select DMZ.
    6. Check the Enable DMZ Host box.
    7. Click the Connected Computers button.
    8. Select your Xbox console from the available devices.
    9. Click the Apply button.


    Disable DMZ

    1. Open a web browser.
    2. Enter http://192.168.1.1 in the address bar and press enter.
    3. Enter “cusadmin” for the username and “admin” for the password when prompted.
    4. Select Firewall.
    5. Select DMZ.
    6. Unheck the Enable DMZ Host box.
    7. Click the Apply button.


    Port Forwarding

    1. Open a web browser.
    2. Enter http://192.168.1.1 in the address bar and press enter.
    3. Enter “cusadmin” for the username and “admin” for the password when prompted.
    4. Select Firewall.
    5. Select Forwarding.
    6. Click the add new button.
    7. Enter a name that describes Xbox.
    8. Select TCP/UDP from the protocol drop down.
    9. Set both the Public Port Range and Private Port Range to 3074.
    10. Click the Connected Computers button.
    11. Select your Xbox console from the list of devices.
    12. Click the Apply button.
    13. Click the add new button.
    14. Enter a name that describes Xbox.
    15. Select UDP from the protocol drop down.
    16. Set both the Public Port Range and Private Port Range to 3544.
    17. Click the Connected Computers button.
    18. Select your Xbox console from the list of devices.
    19. Click the Apply button.
    20. Click the Apply button.


    Disable Port Forwarding

    1. Open a web browser.
    2. Enter http://192.168.1.1 in the address bar and press enter.
    3. Enter “cusadmin” for the username and “admin” for the password when prompted.
    4. Select Firewall.
    5. Select Forwarding.
    6. Check the box next to any Xbox rules.
    7. Click the Delete button.


    Firewall

    *The firewall does not have any adjustable options.*



    Restoring Factory Defaults

    Through Firmware

    1. Open a web browser.
    2. Enter http://192.168.1.1 in the address bar and press enter.
    3. Enter “cusadmin” for the username and “admin” for the password when prompted.
    4. Select WAN/LAN.
    5. Select Backup.
    6. Click the Factory button.


    Through Hardware

    1. Locate the reset button on the back of the device.
    2. Press and hold the reset button for aprox. 5 seconds.
    3. Release the button and wait for the device to restart.


    How to Find Firmware Version

    1. Open a web browser.
    2. Enter http://192.168.1.1 in the address bar and press enter.
    3. Enter “cusadmin” for the username and “admin” for the password when prompted.
    4. Select Status.
    5. Select System Info.




    Firmware Update

    *Firmware updates are handled by ISP*





    Bridging Guide

    1. Open a web browser.
    2. Enter http://192.168.1.1 in the address bar and press enter.
    3. Enter “cusadmin” for the username and “admin” for the password when prompted.
    4. Select Status.
    5. Select Capability.
    6. Uncheck the Resaidential Gateway Function check box.
    7. Click the Apply button.




    Multiple Console Support

    We have confirmed that this network device is unable to support more than one console with an Open NAT.



    Known Issues

    Limited reports of frequent disconnections on Xbox 360, no known resolution at this time.

    Device Manual

    Click
    here     for the manual.
     
    XBR Poseidon, Dec 15, 2014
    #2
  3. XBIR Zeus
    XBIR Zeus Guest
    Hitron: Overview

    Hitron (Modems/Gateways): Overview
    Someone knows solution for error 0x700 thanks for the help ...
     
    XBIR Zeus, Dec 15, 2014
    #3
  4. JezuzOsorio Garcia Win User

    Hitron: Overview

    Someone knows solution for error 0x700 thanks for the help ...
  5. RobertBuckalew Win User

    Latency Issues

    what is the model number of the hitron modem ? most hitrons are also routers (gateways) and that might be the problem....
  6. Pandasaur cx Win User

    Changing NAT type

    The Hitron is the primary router. My cable is connected to it for fast download speeds.

    Arris

    -Hitron

    -- Xbox One, PC, Xbox 360 (All share one cable.)

    -- Cisco

    The other cables are connected to Cisco.
  7. kananadiankid Win User

    XBOX 360 connects to network but not internet

    I have a CGN3ROG Router from Hitron Technologies.
  8. XBF Leslie D Win User

    : MAC address

    Hi Jason,

    Thanks for reaching out to us today. By looking at the category you choose it seems that your device is a Hitron CGN Modem/Gateway. Is this correct? if not what is your device you're using?

    If you are using the Hitron CGN Modem/Gateway here is a PDF manual that shows how to check the MAC address filters.

    Hope to hear back soon.
Thema:

Hitron: Overview

Loading...

  1. Hitron: Overview - Similar Threads - Hitron Overview

  2. Hitron: Console refuses to maintain UPnP

    in XboX Networking Hardware
    Hitron: Console refuses to maintain UPnP: Hitron (Modems/Gateways): Console refuses to maintain UPnP I'm just glad that the change worked for you. Hopefully we'll run into each other out there in the void :) Happy Gaming!...

  3. Hitron: UPnP will not stay on

    in XboX Networking Hardware
    Hitron: UPnP will not stay on: Hitron (Modems/Gateways): UPnP will not stay on The modem is shared by three consoles, one of which has a hard wire due to sharing the room with it. The others have to connect wireless. Not sure...

  4. Hitron: Xbox One S losing internet connection

    in XboX Networking Hardware
    Hitron: Xbox One S losing internet connection: Hitron (Modems/Gateways): Xbox One S losing internet connection Hello Tsunayoshi, Thank you for letting us know the issue has been resolved. We will go ahead and lock this thread. If you ever...

  5. Hitron: Xbox not Connecting to Internet

    in XboX Networking Hardware
    Hitron: Xbox not Connecting to Internet: Hitron (Modems/Gateways): Xbox not Connecting to Internet Try port forwarding, if that dosnt help see how many devices are connected to your router or modem. If u use up all of your ports...

  6. Hitron: Strict NAT

    in XboX Networking Hardware
    Hitron: Strict NAT: Hitron (Modems/Gateways): Strict NAT You said your OLD Xbox had some ports open? did you try opening ports on the NEW Xbox? be620a1d-8f38-4fe3-8daf-cf562151c5bf

  7. Hitron: Port Forwarding to get an Open NAT

    in XboX Networking Hardware
    Hitron: Port Forwarding to get an Open NAT: Hitron (Modems/Gateways): Port Forwarding to get an Open NAT Hi there, Thanks for the quick reply. Go ahead and add all the ports you have listed those are the correct 7 ports that must be added...

  8. Hitron: Overview

    in XboX Networking Hardware
    Hitron: Overview: Hitron (Modems/Gateways): Overview Hitron CGN2 Login Information: Default Gateway – 192.168.1.1 Username – cusadmin Password – login How to Find SSID (Network Name) Open a web...

  9. Hitron: Overview

    in XboX Networking Hardware
    Hitron: Overview: Hitron (Modems/Gateways): Overview Hitron CGN Login Information: Default Gateway – 192.168.1.1 Username – cusadmin Password – login How to Find SSID (Network Name) Open a web browser....

  10. Hitron: Overview

    in XboX Networking Hardware
    Hitron: Overview: Hitron (Modems/Gateways): Overview Someone knows solution for error 0x700 thanks for the help ... 54fb99b8-f3ad-4061-8bf8-f25dbab72420