HDMI no signal xbox360

PeskyCarton3 · May 21, 2019

Hello to everyone my problem with my xbox360 is that it doesn't have signal with my HDMI cable. The Television and the cable works right because I can connect my laptop with my hdmi cable on the tv. Also my xbox360 doesn't have problem because I have tried
a connection of my hdmi and a monitor and it did work. I even try the way to reset the resolution but it didn't work. What is the problem? Does anyone thinks something?

:)

Irixion

Reset your video settings, and make sure your HDPVR is set up correctly. Hauppauge requires the computer to always be turned on, and connected properly to the console and USB ports on your PC. Update your drivers as well. Reboot your PC. Then open Hauppauge
Capture and make sure your Input is set to HDMI and not composite.

WPAK

Hi there,

what happens when you connect the xbox 360 with that HDMI cable directly to your TV, does it show anything?

Also just to be sure, did the console restart when doing the reset thing? Since it should, that's how to know it executed the reset, depending on the model there are different ways too. See the steps here:

"4.As the console starts, press and hold Y while pulling the right trigger on the controller. The display settings are reset to the default settings, and then the console automatically restarts.

Xbox 360 E or Xbox 360 S console: To reset display setting on these console models, you can also just turn off the console and then hold the power button on the front of the console down for about 10 seconds. (The lights will flash several times.)"

Let us know the results

InsaneJokerr

Hi PeskyCarton3,

Did you try resetting your display settings as noted above?

The TV performs a handshake with the console which provides the end result of displaying the xbox UI on your screen. Have you tried using an alternate HDMI cable, If so, did this provide any other results?

InsaneJokerr

Hi PeskyCarton3,

Have you tried using the console on an alternate screen or TV? If you try this and find it works, try the following:

Turn on your Xbox 360
Goto system settings
Goto console settings
Goto display
select 'Display Discovery'
Turn this option on.

You can also try resetting your display settings by turning on your console and holding Y & RT.

Your console will ask you to restart, select yes and wait for it to reboot. Once this has been successful. reconnect it to your origional TV and it should work. Let me know if you continue to have problems.

ooD0C H0L1DAYoo

Try connecting your xbox 360 to a different television.It also just might be the HDMI cable.Try using a different one.

HDMI no signal xbox360