HDMI cable not being recognised

Hey there SeanCollett1,

Thanks for reaching out to the Forums for advice on how to deal with this situation going on with your console. I can totally understand how this could be pretty distressing. If you're experiencing issues even after trying the steps outlined in our support
page entitled Troubleshooting a blank TV screen or monitor while your Xbox One is on do not help,
you might have to look into getting your
console serviced or replaced.

Hope this helps.

Thanks for reading!

I have done these steps over and over again this does not work, when the power light comes on no second beep and does not flash and there is no HDMI signal, I have help both down they make the noise at the same time but this does not work.

My XBOX HDMI connection has stopped working. I turned it off and this morning there was no HDMI being recognised from the XBOX on the TV. Have tried many cables and screens but it does not detect the XBOX.

How do I get this back working?

1. If there's a disc in the Xbox One console, eject it.
2. On the console, press and hold the Xbox button  for 10 seconds to turn off the console.
3. Press and hold the Xbox button  and the Eject button until you hear a beep to turn on the console. You’ll hear one beep right away and a second beep 10 seconds later. The power light
   will flash on before the second beep. Don’t let go until the second beep occurs.
   Note If you have an Xbox One S All-Digital Edition, you’ll need to press and hold the Xbox button  and the Bind button instead, as your
   console does not have an Eject button.
   

Hi, thanks for getting back to me.

I have just tried the cable into the tv on a separate device. The tv recognises the cable in all HDMI ports (2-4). When i plug the cable back into the Xbox the tv shows nothing so therefore it apoears to be something within the Xbox that wont recognise the
cable.

Hope i’m making sense!

Something else to try, using the component cable set the output resolution to the lowest possible setting you can on the console, switch back to the HDMI cable and try again. According to certain folk this will force the TV to recognise the HDMI input. Again
seems a bit weird but you never know.

Personally I think it's simply a setting on the TV that's the issue.