Hauppauge signal strength?

Try resetting your modem and router maybe that will restrengthen the signal.

Hey TCol115,



Are you able to boost that signal strength of your router? Since your Xbox is right next to it maybe you can just make a wired connection to help out.

Reach back and let us know what you find.

That bar meter in BLOPS is not your signal strength, it's your ping speed. Suggest you do

Win-R | cmd | ping 4.71.156.74 -f -t -l 1400

-l above is a dash then a lower case L

Do a Ctrl-C after you've ping'd a dozen times, and let us know the result at the end of each line (like 28ms, 28ms, 27ms, 35ms....)

If the ping "times out" or says "Packet needs to be fragmented but DF set." then you have problems with your network.

Signal strength is also full.

Hi Saleh, my name is Oskayra and I will be happy to help you.

If your console is connected to a Wi-Fi network, check the signal strength

To check the Wi-Fi signal strength of your Xbox console, follow these steps:

Open the Xbox guide.

Select "Profile & System" > "Settings" > "General" > "Network Settings".

In the "Wi-Fi Network" section, look for the "Signal Strength" option.

The signal strength will be displayed on a scale of 1 to 5, with 1 being the weakest signal and 5 being the strongest signal.

If the signal strength is weak, try moving closer to the router. since that may be the reason why it disconnects. If the signal is very low, you can try using a Wi-Fi extender to increase your network coverage.

Another option is to use an Ethernet cable as it provides a more stable connection.

If none of this works for you, it is most likely that the Xbox is defective or your WiFi is limited, you could try to reset it or take your Xbox to a technical service.

Best regards, Oskayra.