Геймпад xbox one после обновления драйвера через Windows перестал работать в беспроводном...

Hi There,

Have you tried using a newer set of batteries? If you are using a play and charge kit perhaps try switching to batteries to see if it works.

Hello WindHanari!

Note You'll be prompted to update to Windows 10 Anniversary Edition if you haven't yet done so.

How to update your Xbox One Controller on Windows 10

I hope this helps!

Felix

Xbox forums support

Hello WindHanari!

Thanks for reaching out to Xbox forums support.

I'm sorry to hear about the issues that you're experiencing with your controller not powering on after the update attempt. Let's try this first..

Go ahead and perform a hard reset and power cycle of
your console. Hold down the power button on the console for about 10 seconds until it shuts down and then remove the power cable from the Xbox and the power outlet for about 5 minutes. Then re-connect and turn on the Xbox.

Let us know if this helps!

Felix

Xbox forums support

можно ссылку на старый windows 10?

[Translate]

can i link to the old windows 10?

Hi WindHanari,

Do you have an Xbox One console or have access to an Xbox One console to complete the firmware update using a USB cable? That is the first solution to this issue, but if you don't have access to a console, then another solution I've
seen is to download the previous version of Windows on a free virtual machine and connect the controller via USB to your PC. Download the older version of the Xbox Accessories app on the virtual machine and try to update the controller. Even if the test "fails"
the controller should turn on.

The solution is provided in the following thread: https://answers.microsoft.com/en-us...k/76c94c49-2565-4e9b-a261-b60a711af018?page=5

Let us know if the solutions on that thread get the controller working again!