Fritz!Box: Port Forwarding

Discus and support Fritz!Box: Port Forwarding in XboX Networking Hardware to solve the problem; Fritz!Box (Modems/Gateways): Port Forwarding Fritz!Box 7330 Login Information: Default Gateway – Web Server's Default Page Username – there is no... Discussion in 'XboX Networking Hardware' started by XBR Poseidon, Jun 8, 2014.

  1. XBR Poseidon
    XBR Poseidon Guest

    Fritz!Box: Port Forwarding


    Fritz!Box (Modems/Gateways): Port Forwarding
    Fritz!Box 7330

    Login Information:

    Default Gateway – Web Server's Default Page

    Username – there is no username or password unless one is set by the user.

    Password –

    Port Forwarding

    1. Open a web browser.
    2. Enter Web Server's Default Page in the address bar. (Or click the link). A username and password is not needed by default. If one was created you will need to enter it here.
    3. Click "Internet".
    4. Click "Permit Access" in the "Internet" menu.
    5. Click the "Port Forwarding" tab.
    6. Click "New Port Forwarding".
    7. Select "Other applications" from the "Port forwarding enabled for" list.
    8. Enter a name of your choice for the port forwarding rule in the "Name" field.
    9. Set the protocol to TCP from the "Protocol" drop-down menu.
    10. Enter 3074 for both the “From Port” and the “To Port”.
    11. Select your Xbox console from the “to computer” drop down.
    12. Click “Ok”.
    13. Click "New Port Forwarding".
    14. Select "Other applications" from the "Port forwarding enabled for" list.
    15. Enter a name of your choice for the port forwarding rule in the "Name" field.
    16. Set the protocol to UDP from the "Protocol" drop-down menu.
    17. Enter 3074 for both the “From Port” and the “To Port”.
    18. Select your Xbox console from the “to computer” drop down.
    19. Click “Ok”.




    Disable Port Forwarding

    1. Open a web browser.
    2. Enter Web Server's Default Page in the address bar. (Or click the link). A username and password is not needed by default. If one was created you will need to enter it here.
    3. Click "Internet".
    4. Click "Permit Access" in the "Internet" menu.
    5. Click the "Port Forwarding" tab.
    6. Click the red X to the right of the two rules that were created.

    :)
     
    XBR Poseidon, Jun 8, 2014
    #1
  2. XBR Poseidon
    XBR Poseidon Guest
    Fritz!Box: Port Forwarding

    Fritz!Box (Modems/Gateways): Port Forwarding
    Fritz!Box 7390

    Login Information:

    Default Gateway – Web Server's Default Page

    Username – there is no username or password unless one is set by the user.

    Password –



    Port Forwarding

    1. Open a web browser.
    2. Enter Web Server's Default Page in the address bar. (Or click the link). A username and password is not needed by default. If one was created you will need to enter it here.
    3. Click "Internet".
    4. Click "Permit Access" in the "Internet" menu.
    5. Click the "Port Forwarding" tab.
    6. Click "New Port Forwarding".
    7. Select "Other applications" from the "Port forwarding enabled for" list.
    8. Enter a name of your choice for the port forwarding rule in the "Name" field.
    9. Set the protocol to TCP from the "Protocol" drop-down menu.
    10. Enter 3074 for both the “From Port” and the “To Port”.
    11. Select your Xbox console from the “to computer” drop down.
    12. Click “Ok”.
    13. Click "New Port Forwarding".
    14. Select "Other applications" from the "Port forwarding enabled for" list.
    15. Enter a name of your choice for the port forwarding rule in the "Name" field.
    16. Set the protocol to UDP from the "Protocol" drop-down menu.
    17. Enter 3074 for both the “From Port” and the “To Port”.
    18. Select your Xbox console from the “to computer” drop down.
    19. Click “Ok”.




    Disable Port Forwarding

    1. Open a web browser.
    2. Enter Web Server's Default Page in the address bar. (Or click the link). A username and password is not needed by default. If one was created you will need to enter it here.
    3. Click "Internet".
    4. Click "Permit Access" in the "Internet" menu.
    5. Click the "Port Forwarding" tab.
    6. Click the red X to the right of the two rules that were created.
     
    XBR Poseidon, Jun 8, 2014
    #2
  3. XBR Poseidon
    XBR Poseidon Guest
    Fritz!Box: Port Forwarding

    Fritz!Box (Modems/Gateways): Port Forwarding
    Fritz!Box 3390

    Login Information:

    Default Gateway – Web Server's Default Page

    Username – there is no username or password unless one is set by the user.

    Password –



    Port Forwarding

    1. Open a web browser.
    2. Enter Web Server's Default Page in the address bar. (Or click the link). A username and password is not needed by default. If one was created you will need to enter it here.
    3. Click "Internet".
    4. Click "Permit Access" in the "Internet" menu.
    5. Click the "Port Forwarding" tab.
    6. Click "New Port Forwarding".
    7. Select "Other applications" from the "Port forwarding enabled for" list.
    8. Enter a name of your choice for the port forwarding rule in the "Name" field.
    9. Set the protocol to TCP from the "Protocol" drop-down menu.
    10. Enter 3074 for both the “From Port” and the “To Port”.
    11. Select your Xbox console from the “to computer” drop down.
    12. Click “Ok”.
    13. Click "New Port Forwarding".
    14. Select "Other applications" from the "Port forwarding enabled for" list.
    15. Enter a name of your choice for the port forwarding rule in the "Name" field.
    16. Set the protocol to UDP from the "Protocol" drop-down menu.
    17. Enter 3074 for both the “From Port” and the “To Port”.
    18. Select your Xbox console from the “to computer” drop down.
    19. Click “Ok”.




    Disable Port Forwarding

    1. Open a web browser.
    2. Enter Web Server's Default Page in the address bar. (Or click the link). A username and password is not needed by default. If one was created you will need to enter it here.
    3. Click "Internet".
    4. Click "Permit Access" in the "Internet" menu.
    5. Click the "Port Forwarding" tab.
    6. Click the red X to the right of the two rules that were created.
     
    XBR Poseidon, Jun 8, 2014
    #3
  4. Inglemoose Win User

    Fritz!Box: Port Forwarding

    All information input as said, NAT currently moderate and not open.

    IPv6 is also disabled. Will reset router and comment again if the NAT opens.

    P.S. God I hate NAT.
  5. Xx ROZILLA xX Win User

    Strict NAT type

    If your Router blocks the Teredo Port UDP 3544 you can´t do anything against it. XBOX one needs that you Router can use the UDP Port 3544 8you so NOT need to Port Forward or open the port).

    Many Routers like Fritz Box block Teredo Port by default - So the Fritz Box gets an Firmwareupdate where you can enable NOT to block this Port.

    You can try to update your Firmware of your Router and you can search how to enable the teredo Port (like I said above you don´t need to port Forward this Port)
  6. 4297f9a3-1dfb-4130-8 Win User

    Xbox-Network NAT-Type open and Server-connectivity blocked

    Rather than individually forwarding all of those ports, I would recommend configuring your FRITZ!Box to enable UPnP for your PC. This will allow Windows 10 to automatically tell the FRITZ!Box exactly which ports it needs to have open, when it needs them,
    and then to close the ports back down again when they're not needed any more.

    In your FRITZ!Box go to: Home Network > Network, find your PC on the list and click its "Edit" icon, then enable the "Permit independent port sharing for this device" setting.

    Hopefully this will improve things for you. I can confirm that on my own network with this setting enabled (and the Teredo filter enabled, the FRITZ!Box default), my Xbox reliably shows NAT as "Open" so it should do the trick for Windows as well.
  7. taidara Win User

    Teredo IP address error.

    A Teredo server is listening on network port 3544 (UDP) and the FRITZ!Box is, by default, configured to block port 3544 for security reasons.

    So with this in mind you would have to login to your FRITZ!Box web utility interface and disable the option: "Teredo filter enabled".

    For this to work, you will have to take more sure "Advanced View" is enabled on the user interface of your FRITZ!Box.

    - Click "Filters" in the "Internet" menu.

    - Click on the "Lists" tab.

    - Disable the option "Teredo filter enabled".

    - Click "Apply" to save your settings.

    I would also make sure IPv6 is completely disabled for all interfaces on your FRITZ!Box.

    At this point, make sure only UPnP (Universal Plug and Play) is enabled, as the feature to forwarding (automatically) network ports used by Xbox Live.

    Don't forget to "Apply" your configuration and reboot your gateway afterwards.

    Post back and let us know how that goes.
  8. Xx ROZILLA xX Win User

    IPv6 Party Chat without Teredo Ports ?

    Sorry for the late response:

    I think Teredo should be disabled on Router because I also have other devices not only xbox and pc.

    For blocking Traffic I'm not sure: here is it written so I'm not sure if I need to Port Forward

    en.avm.de/.../845_Setting-up-IPv6-port-forwarding-in-the-FRITZ-Box

    I use SLAAC for internal IPv6 no DHCPv6

    The Problem I have. If I disable Teredo I get NAT strict and I would like to get it open or IPv6 traffic. The ONLY Problem I have is - I can't join xbox live Partys without teredo and I would like to have a Solutuion for it :)
Thema:

Fritz!Box: Port Forwarding

Loading...

  1. Fritz!Box: Port Forwarding - Similar Threads - Fritz Box Port

  2. : Fritz!Box 7530 strict NAT and double NAT causing problems with Xbox One X games like...

    in XboX Networking Hardware
    : Fritz!Box 7530 strict NAT and double NAT causing problems with Xbox One X games like...: : Fritz!Box 7530 strict NAT and double NAT causing problems with Xbox One X games like Destiny 2 Why would you disable IPv6? Internet Protocol version 6 is the most current network protocol,...

  3. Incombatibility between Xbox game pass and Fritz!Box 7590

    in XBoX on Windows
    Incombatibility between Xbox game pass and Fritz!Box 7590: Hello. I have problem to join to xbox game pass account, everytime with my Fritz!box 7590. I cought on Internet and I see Incombatibility between Xbox game pass and Fritz!Box 7590. Can you help to...

  4. Fritz!Box: Port Forwarding

    in XboX Networking Hardware
    Fritz!Box: Port Forwarding: Fritz!Box (Modems/Gateways): Port Forwarding Fritz!Box 7490 Login Information Gateway: Web Server's Default Page Username: admin Password: password *There have been reports that this...

  5. Fritz!Box: Port Forwarding

    in XboX Networking Hardware
    Fritz!Box: Port Forwarding: Fritz!Box (Modems/Gateways): Port Forwarding Fritz!Box 7272 Login Information Gateway: Web Server's Default Page Username: admin Password: password Port Forwarding Connect a computer to...

  6. Fritz!Box: Port Forwarding

    in XboX Networking Hardware
    Fritz!Box: Port Forwarding: Fritz!Box (Modems/Gateways): Port Forwarding Fritz!Box 7390 Login Information: Default Gateway – Web Server's Default Page Username – there is no username or password unless one is set by the...

  7. Fritz!Box: Port Forwarding

    in XboX Networking Hardware
    Fritz!Box: Port Forwarding: Fritz!Box (Modems/Gateways): Port Forwarding All information input as said, NAT currently moderate and not open. IPv6 is also disabled. Will reset router and comment again if the NAT opens....

  8. Fritz!Box: Port Forwarding

    in XboX Networking Hardware
    Fritz!Box: Port Forwarding: Fritz!Box (Modems/Gateways): Port Forwarding Fritz!Box 3390 Login Information: Default Gateway – Web Server's Default Page Username – there is no username or password unless one is set by the...

  9. Fritz!Box: Port Forwarding

    in XboX Networking Hardware
    Fritz!Box: Port Forwarding: Fritz!Box (Modems/Gateways): Port Forwarding Fritz!Box 3370 Login Information: Default Gateway – Web Server's Default Page Username – there is no username or password unless one is set by the...

  10. Fritz!Box FRITZ!Box 3272: Port Forwarding

    in XboX Networking Hardware
    Fritz!Box FRITZ!Box 3272: Port Forwarding: Fritz!Box (Modems/Gateways) FRITZ!Box 3272: Port Forwarding Fritz!Box 3272 Login Information: Default Gateway – Web Server's Default Page Username – there is no username or password unless one...