Fritz!Box: Device Manual

Hi,

Appreciate if you can post up the make and model of your router and your modem as well (if this is not a single device).

Could it be the Fritz Box by any chance?

Rather than individually forwarding all of those ports, I would recommend configuring your FRITZ!Box to enable UPnP for your PC. This will allow Windows 10 to automatically tell the FRITZ!Box exactly which ports it needs to have open, when it needs them,
and then to close the ports back down again when they're not needed any more.

In your FRITZ!Box go to: Home Network > Network, find your PC on the list and click its "Edit" icon, then enable the "Permit independent port sharing for this device" setting.

Hopefully this will improve things for you. I can confirm that on my own network with this setting enabled (and the Teredo filter enabled, the FRITZ!Box default), my Xbox reliably shows NAT as "Open" so it should do the trick for Windows as well.

My Router: Fritz!box 7430

Thank you! I don't have any information on this box itself, however we do have information on

another Fritz!Box that might be affecting it. If it's still the same interface for your device, I suggest trying the suggestions in that link to see if it will help you out.

Let me know how it goes!

I have noticed there is a newer Firmware for the 7390 listed, but it is German ... would this be ok for an Australian Fritz?

FRITZ.Box_Fon_WLAN_7390.AnnexB.84.06.00.image 24-Oct-2013 10:15 15M

". FRITZ.Box_Fon_WLAN_7390 image *" containing the update file in this directory

the current firmware (system software) for Box Fon WLAN 7390th

Caution: This firmware is only for FRITZ Box Fon WLAN 7390 suitable!

Product: FRITZ Box Fon WLAN 7390!

Version: FRITZ OS 6.00 (84.06.00)

Language: German

Release date: 28/10/2013

Hi there Trained,

Thanks for reaching out. I'm sorry to hear about the issue with the network connectivity on the Xbox One X.

I recommend to try Clearing the Mac addresses on the Xbox.

Check out these articles: Network settings on Xbox Oneand
I get an error message when I run the ‘Test network connection’ on Xbox One.

Try this:

• Select Settings on the Xbox
  
• Select Network
  
• Select Network Settings
  
• Select Advance Settings
  
• Alternate Mac address
  
• Select Clear
  
• Select Restart
  

This step will restart the console. When it reboots, Select Network >Select Network Settings > Set up wireless network.

Try this out and let us know the results.

Thanks,

Brad