error with fault codes 0x80072F8F 0x00000000 0x00000201

AIRinPROvO · May 13, 2020

xBox starts to show the following error:

There is the problem with update.

You need this update to use your console, but something went wrong.

Error code: 0x80072F8F 0x00000000 0x00000201

There are a few buttons, try again, check connection, turn off Xbox.

I have checked the connection to the internet, it is good. I can skip and enter to the menu, have also tried to make console reset, but situation is same. So in fact Xbox now is blocked at the update that cannot be installed due to unknown reason. What
shall i do to fix this problem?

:)

DeadXMC

Yes the error code is: 0x80072F8F 0x00000000 0x00000201

Boom B00M Boom

I think it would be a good idea if you read this thread on the same issue:

XBox One shows error with fault codes 0x80072F8F 0x00000000 0x00000201 when connects to the Internet

MonjaJozef

Try first with this:

1. Power off your console, and then unplug the power cord to ensure that the console is completely powered off.

2. Wait 30 seconds, then plug the power cord back in.

3. Press and hold the BIND (controller sync button located on the left side of the console or bottom right if a one S or one X) and the EJECT button and then just press the Xbox button on the console once.

4. Continue holding the BIND and EJECT buttons for 10-15 seconds.

5. Listen for two “power-up” tones a couple of seconds apart. You can release the BIND and EJECT buttons after the second power-up tone.

6. The console should power up and take you directly to the Xbox Startup Troubleshooter.

7. To reset your console from the Xbox Startup Troubleshooter, use the D-pad and A button on your controller to select Reset this Xbox.

9. When prompted, select Keep games and apps. This option will reset the OS and delete all potentially corrupted data without deleting your games or apps.

If that not works you will need an offline update. Link:https://beta.support.xbox.com/help/hardware-network/console/system-update-solution

AIRinPROvO

Tried that already , and tried again useing remove everything now i have the error code 0x8b0500b6 0x00000000 0x00000201

Mackharo

Yeah, no issues connecting before this happened.

I cant even connect the new console which is even stranger. Yet i can connect them both to my hotspot.

The error codes i get are;

0x80072F8F

0x00000000

0x00000201

error with fault codes 0x80072F8F 0x00000000 0x00000201