ERROR DE DNS (DNS ERROR)

MisaelMartinez Reyes · Nov 15, 2018

Tengo un problema conel servidor DNS ya intente solucionarlo como indica en los pasos pero me sigue pareciendo error. Que más puedo hacer? no puedo conectarme a mi internet.

[Translation]

I have a problem with DNS server and try to fix it as indicated in the steps but I still seem to be error. What else can I do? I can't connect to my internet.

:)

PlaneAuthor1288 · Nov 15, 2018

dns error

help idk what a dns is it says dns error

ibbyPK · Nov 15, 2018

NEED HELP CONNECTING XBOX 360 SLIM WITH TPLINK TL-WR2543ND

Set to automatic with no security, it gets IP Address 169.254.103.157 / 255.255.0.0

and if i configure the IP manually to 192.168.0.25 / 255.255.255.with DNS set to automatic .. it gives DNS error.

And with IP and DNS both configured manually it gives IP Address error

XBF Erick C · Nov 15, 2018

Hey there Misael,

Sorry to hear you are running into this problem. I know you are stating that you have gone through the indicated steps for the error but I just want to confirm that this was the steps exactly as shown on the support article for "I
get an error message when I run the 'Test network connection' on Xbox One."

Let us know!

XBF Erick C

Hey there Misael,

Sorry to hear you are running into this problem. I know you are stating that you have gone through the indicated steps for the error but I just want to confirm that this was the steps exactly as shown on the support article for "I
get an error message when I run the 'Test network connection' on Xbox One."

Let us know!

Mister Beep

Hey there!

Could you post up the specific issue you're encountering? You can start out by trying each of the solutions on our

Xbox 360 Network Troubleshooter page.

Keep us posted!

Alycia Windsong

Latest version of the 2wire. I don't control when it updates, that's up to AT&T Uverse.

Home network is thus...

360, Uverse Box and Laser Printer connect to a 1 Gbps Netgear 8 port switch, which then connects to a Cat 5e Wall socket which comes out in my wiring closet patch panel to my 24 port 1Gbps switch, which then connects to the Uverse router.

Just on a lark I switched the 360 to wireless and it connected fine... so it's a wiring problem... So on a lark I rebooted the 8 port switch (which was working fine for the printer and the Uverse tv box), and suddenly the wired connection worked.

MissyQ

With manual DNS, what settings did you try? Something your computer was getting, too?

Dark Phoenix XI

I managed to get it to work by turning the ethernet Configure IPv4 from off (what was recommended via the guide on support) to using DHCP, not sure if this will work for you (assuming you haven't tried already) but I wish you good luck!

ERROR DE DNS (DNS ERROR)