Elite Series 2 Core Trigger doesnt work when moving the right joystick

Happy to help you.
If you have more problems, contact us.

I understand that you are experiencing issues with the trigger and joystick locking on your Xbox Series X controller.

Let's try a few steps that I'll leave you with. If it doesn't really work, I would recommend that you contact Microsoft support directly!

Check your trigger lock settings: Make sure the trigger lock settings in the Xbox Accessories app are set correctly

Try another driver: If you have another driver, try that one to see if the problem persists. If the problem does not occur with the other driver, the original driver may be defective

Factory reset: As a last resort, you could try doing a factory reset of your Xbox. Please note that this will delete all data and settings, so you should back up any important data before attempting this.

You also mentioned that you can send a video of the problem. That could be very helpful for the Xbox support team to better understand the issue. I hope this helps you!

Hello AGWytGaming , My name is Khaji I am an independent advisor and I will be happy to help you today.
I'm sorry to hear that you are experiencing issues with your trigger on the Elite Series 2 core when you move the right stick. Here are some suggestions that might help you solve this problem:

Check your trigger settings: Make sure the trigger settings in the Xbox companion app are set correctly. The app allows you to customize the sensitivity and travel of the triggers. Check to see if there are any settings that may be affecting how the trigger works when you move the right stick.
Update controller firmware: A firmware update may be available for your Core Elite Series 2. Connect the controller to your PC using a USB cable and open the Xbox companion app. From there, check to see if firmware updates are available and, if so, follow the instructions to update the driver.
Perform a soft reset of the controller: You can try to perform a soft reset of the controller to fix temporary glitches. To do this, press and hold the pairing button on the back of the controller for about 10 seconds. Then, re-pair the controller with your console or PC and check if the issue persists.
Check the controller connection: Make sure the controller is properly connected to your console or PC. If you are using a wireless connection, check for interference or signal issues that could affect controller performance. If you use a wired connection, make sure the cable is connected correctly and is not damaged.

If the reply was helpful, please don't forget to upvote or accept as an answer, thank you

Just curious if you ever figured something out? I’m having the same issue only it’s my left thumb stick and it only does it when I pull back on it.

Thank you so much for your help! I will contact Microsoft Support