Dolby Atmos erorr 0x80bd0009.

SzymonMackiewicz · Dec 13, 2018

Hi, I have a plug-in to connect my Soundbar N950 and Xbox One. Both devices have connected via HDMI. My TV does not support Dolby Atmos because I have an OLED55B6 which has no support. That's why I bought
a console that I connected to HDMI ARC and to the HDMI OUT console. The cables are checked and work. I have applications installed, but I can not configure it to the end because I get to the stage where I have to set HDMI bitstream out, Optical input off,
but Dolby Atmos can not set up because an error pops up. I also changed the HDMI setting from automatic to manual, but in this input I can set the Dolby Atmos, but I can not set the 4k resolution. I attach 2 photos. I am asking for help because I've tried
everything. At the end I will say that I reset my consoles and it did not help.

:)

SzymonMackiewicz

Dzięki niemu Atmosfera nie działa za HDMI.
Aby się zadziałało, przez telewizor (HDMI ARC do TV, a następnie TV do systemu dźwiękowego), o tym mówisz, że telewizor nie działa.
Abynym działaniem, było zadziałało, jest, czy jest zajęany przez telewizor,
Niestety zestaw optyka nie powołany również Atmos.

so what should I do to make it go to me? I will not get Dolby Atmos? Do I have to wait for updates? I can not restore 4k at manual are there any other ways?

Puppy Fujo

With your setup Atmos cannot.be setup through HDMI. For this to work the sound passes through your tv (HDMI ARC to TV and then TV to sound system) which you said your tv doesn't support. Btw the Xbox doesnt support ARC connections either. The only way
this is going to work is if it is supported by your tv as it must pass through your tv. Unfortunately optical connection doesn't support Atmos either.

SzymonMackiewicz

With your setup Atmos cannot.be setup through HDMI. For this to work the sound passes through your tv (HDMI ARC to TV and then TV to sound system) which you said your tv doesn't support. Btw the Xbox doesnt support ARC connections either. The only
way this is going to work is if it is supported by your tv as it must pass through your tv. Unfortunately optical connection doesn't support Atmos either.

can you help me? because I have connected consoles for soundbar up to hdmi 1 and soundbar connected to tv using hdmi arc and still do not have sound Dolby atmos, the same message pops up. write me what should I do? and is it the fault of the microsoft?

mattpaulson

I ve done all that. When I select dolby atmos in the settings on m xbox it gives me an error code 0x80bd0009

Kev7420

try to update the controller it is seperate from a system update and make sure you check your audio settings, maybe try this https://windowsreport.com/xbox-error-0x80bd0009-dolby-atmos/ or https://answers.microsoft.com/en-us/xbox/forum/all/xbox-1-error-code-0x80bd0009/2a90e68d-6901-45b6-9da4-d56f0b49d7de

Dolby Atmos erorr 0x80bd0009.