Console won't load past initial start up screen

Hey Sean,

Thank you for posting here on the Xbox forums. I have split your post into its own thread in order to help you out directly. Sounds like you need to reset your operating system. Ill give you the steps that will launch your console in troubleshooting mode.

1. Power off your console, and then unplug the power cord to ensure that the console is completely powered off.
   
2. Wait 30 seconds, and then plug the power cord back in.
3. Press and hold the BIND button (located below the Xbox button on the console) and the
   EJECT button (located on the front of the console), and then press the
   Xbox button on the console.
4. Continue holding the BIND and EJECT buttons for 10-15 seconds.
   
5. Listen for two “power-up” tones a couple of seconds apart. You can release the
   BIND and EJECT buttons after the second power-up tone.
6. The console should power up and take you directly to the Xbox Startup Troubleshooter.

From this screen, choose reset console > Reset and keep games and apps. Make sure you know your login credentials. You will need to sign into your profiles after the reset. No games or apps will need redownloading .

Let us know the results!

Now my Battlefield 4 won't start up and just sits at the initial loading screen for 5 seconds then kicks me to the dashboard. Send it in?

Kryllo I did everything in your post and followed the steps in the link you posted. Everything seemed to be going fine but about 1/3 of the way through the updating stopped and i received this error message "E101 81070005 8007045D" Not sure what to do from
here.

For your issue try this first Bustersnm try this first:

• Confirm that both your TV and Xbox One console are powered on.
• Check that your TV is set to the proper input signal (HDMI).
• Check that the HDMI cable connection to your console is secure.
• Check that the HDMI cable connection to your TV is secure.
• Perform a cold boot on your Xbox One console by holding the power button on the front of the console for approximately 10 seconds, and then power on again.
  
• Reset your display settings. Here's how:
  1. If there’s a disc in the Xbox One console, eject it.
  2. On the console, press and hold the Xbox button for five seconds to turn off the console.
     
  3. Press and hold the Xbox button and the Eject button until you hear a beep to turn on the console.
     
     Note This will boot your console in a low resolution mode (640 × 480). To reset these settings again, press the Menu button, select Settings, and then select Display & sound.
     
     For more information on advanced display settings, see How to adjust the display settings on your Xbox One console.
     
• Try plugging the HDMI cable into a different HDMI port on your TV.
• Try using a different HDMI cable to connect your console to your TV.
• Try connecting your console to a different TV.

the usb method didnt work for me, i had to restore to factory defaults and now it works,just had to re download everything