Connecting Xbox One Rockband4 drums and guitar

YonderDuke89978 · Jul 10, 2016

I loaded the Xbox One Rockband4 but the drums and guitar are not connecting. I pressed the On button on both and the wireless connect button, but noting is working.

:)

LeandroAraujo3108 · Jul 10, 2016

Compatibility Acessories

Can I use my drums and guitar with wire Xbox 360 on Xbox one?

TheXxGuy · Jul 10, 2016

Guitar hero 5 or older games

If there's any one that wanna play guitar hero 5 or other guitar heros (band play) add me. (don't have GH:WOR)

i know there's not a forum for GH:5 or other.

We can do Career mode and Challenges, Quickplay mode, or just a Pro-face off.

i have Drums and Guitar. (mostly drums)

just add me i don't go on forum much.

M3tal Daz3 · Jul 10, 2016

Keep in mind that you must have the Legacy Game Controller Adapter hooked up to your Xbox One to play Rock Band 4 with compatible legacy music game controllers. You do NOT need to sync microphones - as long as a controller is synced to your console, plug
in your microphone via USB and you're good to go!

1 Make sure your Xbox One is turned on and you have Rock Band 4 running.

2 Make sure your Rock Band 4 controller that you are trying to sync has fresh batteries.

3 Press and hold the Xbox One button on your instrument. This is found in the center of your drum kit or next to the D Pad on your guitar.

4 A white light should turn on and start blinking slowly. This means the controller is waiting to sync.

5 AT THE SAME TIME: Press and hold the sync button on the Xbox One (located to the left of the CD drive) and press and hold the small wireless button on your Rock Band 4 controller (for drums, this is a black button found on the bottom left side of the main
center brain. For guitars, this is a white button found where the amp plug would be). You only need to hold down both of these buttons for a maximum of two seconds.

6 The white light on your instrument should start blinking quickly. This means the controller is trying to sync with your console. After a few moments, it will return to blinking slowly and then stop blinking all together. If the light is steady and not
blinking, this means your controller has synced.

7 If your controller continues to blink slowly, repeat step 5 until the light becomes steady. Make sure to press BOTH sync buttons on the Xbox One and Rock Band 4 controller at the same time!

8 Once your controller has synced, press the Menu button (the button that has three thick black parallel lines) to officially get in game and rocking!

M3tal Daz3

Keep in mind that you must have the Legacy Game Controller Adapter hooked up to your Xbox One to play Rock Band 4 with compatible legacy music game controllers. You do NOT need to sync microphones - as long as a controller is synced to your console, plug
in your microphone via USB and you're good to go!

1 Make sure your Xbox One is turned on and you have Rock Band 4 running.

2 Make sure your Rock Band 4 controller that you are trying to sync has fresh batteries.

3 Press and hold the Xbox One button on your instrument. This is found in the center of your drum kit or next to the D Pad on your guitar.

4 A white light should turn on and start blinking slowly. This means the controller is waiting to sync.

5 AT THE SAME TIME: Press and hold the sync button on the Xbox One (located to the left of the CD drive) and press and hold the small wireless button on your Rock Band 4 controller (for drums, this is a black button found on the bottom left side of the main
center brain. For guitars, this is a white button found where the amp plug would be). You only need to hold down both of these buttons for a maximum of two seconds.

6 The white light on your instrument should start blinking quickly. This means the controller is trying to sync with your console. After a few moments, it will return to blinking slowly and then stop blinking all together. If the light is steady and not
blinking, this means your controller has synced.

7 If your controller continues to blink slowly, repeat step 5 until the light becomes steady. Make sure to press BOTH sync buttons on the Xbox One and Rock Band 4 controller at the same time!

8 Once your controller has synced, press the Menu button (the button that has three thick black parallel lines) to officially get in game and rocking!

EggsBoxJuan

Hi, do you have any Rockband or Guitar hero drums/guitars etc or even the Guitar hero live usb dongle? That dongle has been known to cause similar issues when left connected to the Xbox.

Irixion

A lead? What do you mean a lead? You connect the drums and guitar separately...

StuartATrueRed

There is no Guitar Hero drums for the Series X or S. There is Rock Band drum kits for the Xbox One, which should work on the Series X|S consoles, but as SwordofWhedon said, they are now expensive, and can be very hard to find now.

Burst Axe

Guitar Hero assuming there is a drum set sitting around.

Connecting Xbox One Rockband4 drums and guitar