Comtrend Comtrend CT-5072T: Gals! Game like ****'s on fire

[quote user="IsAaCbe ballin"]Then ethernet cable running from internet port on modem to ethernet port on a similar looking black box that says "Comtrend OT-5072T"[/quote]Can you verify if this is the Comtrend CT-5072T.

Thank you!

Thank you! Can you also tell us if your CT-5072T is set to bridge mode. The Comtrend CT-5072T is a ADSL+2 modem with built in router. I've mentioned earlier that you should only have one device doing NAT. You will also have to configure the router function
on your SPA2102 so it only acts as an ATA when connected to your Linksys EA2700. This is your two main issues to why you can't connect properly.

Greetings BladeRaxor1!

HaglePer is correct!

The Comtrend CT-5372 has router built-in to this device and since you connect an additional router to this device, (Asus RT-N56u) your connection will be NAT'd twice for traffic forwarded to your Xbox. This scenario all make sense with a symmetric NAT
behavior/strict NAT.

Could you therefore verify if your Comtrend CT-5372 is operating in bridge mode.

Thank you!

I was trying to do a Port Forward on a Comtrend Router Model# WR-5882 and was unable to find any information as far as screenshots and step by step processes. I have looked at Portforward.com and in the forums. If you could please add any information on
this model or point me in the right direction to find it, that would be greatly appreciated!

Ok so, this is how my cords are set up: ethernet cable running from internet port on router to ethernet port on modem. Then ethernet cable running from internet port on modem to ethernet port on a similar looking black box that says "Comtrend OT-5072T"