Code Received, not working

Hey Deuce213!

Is it possible you had already redeemed the code previously without realizing it? If you search for the game in the marketplace on an Xbox 360 does it show as purchased?

Look at the original remote to the receiver and see if there is a model number on the remote. If so, enter that as the receiver code. That's what I did for mine and it all worked. My receiver was listed but wouldn't work until I put the remote code in.

Hey No CN Me 11! Have you received a code that is not working or are you still waiting to receive the code? Post back and let us know!

I am an owner of a A/V Custom company. IR receiver is just a hair off of the eject button to the right. It works, but they are new codes. Not the 360 code or original xbox codes. The old codes are toggle codes and won't work. I found that I was over
flashing the receiver. Turn down the IR power if you can, that helped me. It is also a ridiculously small spot and no room for error.

I DID, in fact, get this to work. Here is what I did.

1. I googled (or Binged ) "Sony STR-DE635 Remote Codes". A lot of results said that remote codes for my receiver do not exist. That seemed unlikely, because my Logitech Harmony remote works fine with my receiver. I did not let that deter me.
   
2. I called Xbox support where I learned the remote codes Xbox One uses are, in fact, the SAME remote codes used by universal remotes that have been around for years. I learned that these codes are pretty much standard in the industry - meaning the same codes
   work with all remotes that can support them. Interesting.
3. After learning all that, I next did a search for something like "Sony Universal Remote Codes". This returned some user manuals for universal remotes that contained sections for Sony receivers.
   
4. I began entering the 4-digit codes into the A/V receiver section of the One Guide device settings from one of the PDF files. None of those worked.
   
5. On the second users manual I opened, the very first Sony receiver code worked!
   

Now "Xbox on" turns on my Samsung TV, my Motorola DVR, and my Sony receiver. "Xbox volume up (and down)" changes the volume, and "Xbox mute" works as well.
I should also mention that the codes for my TV and DVR all have a one-letter, 4-digit format. However, when I was entered the Sony receiver codes one by one, I only entered the 4 digits in the universal remote manuals I found during my internet search.
So in MY case, no letters were needed in the receiver code that worked.
I hope this helps someone.