Belkin: Wireless Security

Belkin (Routers): Wireless Security
Login Information

• Gateway - 192.168.2.1
• Username - N/A (None)
• Password - N/A (None)

How to Find Wireless Password (WPA/WEP)

1. Open a web browser.
2. In the address bar at the top, type in 192.168.2.1
3. Input the password and click Login (by default, the password should be left blank).
   
4. From the main menu expand Advanced Settings.
5. Select Security under WIFI on the right hand side of the screen.
6. Your password will be listed under Pre-shared Key or WEP key.

Changing Wireless Security Type/Disabling

1. Open a web browser.
2. In the address bar at the top, type in 192.168.2.1
3. Input the password and click Login (by default, the password should be left blank).
   
4. From the main menu expand Advanced Settings.
5. Select Security under WIFI on the right hand side of the screen.
6. The security type will be listed as Authentication.
7. Set to none for no security or choose your preferred encryption type.

:)

 

Belkin: Wireless Security

Belkin (Routers): Wireless Security
Login Information

• Gateway - 192.168.2.1
• Username - N/A (None)
• Password - N/A (None)

How to Find Wireless Password (WPA/WEP)

1. Plug the computer into a LAN port via an ethernet cable.
2. Open a web browser.
3. In the address bar at the top, type in 192.168.2.1
4. Click Login in the upper right.
5. Input the password and click Login (by default, the password should be left blank).
   
6. Select Security from the menu on the left under the Wireless section.
7. Uncheck the box labeled "Obscure PSK" to make the Wireless Password visible.

Changing Wireless Security Type/Disabling

1. Plug the computer into a LAN port via an ethernet cable.
2. Open a web browser.
3. In the address bar at the top, type in 192.168.2.1
4. Click Login in the upper right.
5. Input the password and click Login (by default, the password should be left blank).
   
6. Select Security from the menu on the left under the Wireless section.
7. To change or disable the Wireless Security, select the desired Security Mode from the dropdown (Disabled, WPA/WPA2-Personal(PSK), 128-bit WEP or 64-bit WEP).
   
8. If WPA/WPA2-Personal(PSK) is selected, choose the Authentication (WPA-PSK, WPA2-PSK or WPA-PSK + WPA2-PSK) and Encryption Technique (TKIP or AES). WPA2-PSK with AES is recommended.
   
9. Enter the Pre-Shared Key or WEP Key.
10. If WEP security is selected the password will need to be 10 charecters in length (if 64-bit) or 26 characters in length (if 128-bit) and can only use 0-9 and A-F.
    
11. If WPA or WPA2 was selected the password can be between 8-63 characters, is case sensative and can use any character on your keyboard.
    
12. Once the passphrase has been entered select Apply Changes at the bottom of the page.
    

 

Belkin: Wireless Security

Belkin (Routers): Wireless Security
Login Information

• Gateway - 192.168.2.1
• Username - N/A (None)
• Password - N/A (None)

How to Find Wireless Password (WPA/WEP)

1. Plug the computer into a LAN port via an ethernet cable.
2. Open a web browser.
3. In the address bar at the top, type in 192.168.2.1
4. Click Login in the upper right.
5. Input the password and click Login (by default, the password should be left blank).
   
6. Select Security from the menu on the left under the Wireless section.
7. Uncheck the box labeled "Obscure PSK" to make the Wireless Password visible.

Changing Wireless Security Type/Disabling

1. Plug the computer into a LAN port via an ethernet cable.
2. Open a web browser.
3. In the address bar at the top, type in 192.168.2.1
4. Click Login in the upper right.
5. Input the password and click Login (by default, the password should be left blank).
   
6. Select Security from the menu on the left under the Wireless section.
7. To change or disable the Wireless Security, select the desired Security Mode from the dropdown (Disabled, WPA/WPA2-Personal(PSK), 128-bit WEP or 64-bit WEP).
   
8. If WPA/WPA2-Personal(PSK) is selected, choose the Authentication (WPA-PSK, WPA2-PSK or WPA-PSK + WPA2-PSK) and Encryption Technique (TKIP or AES). WPA2-PSK with AES is recommended.
   
9. Enter the Pre-Shared Key or WEP Key.
10. If WEP security is selected the password will need to be 10 charecters in length (if 64-bit) or 26 characters in length (if 128-bit) and can only use 0-9 and A-F.
    
11. If WPA or WPA2 was selected the password can be between 8-63 characters, is case sensative and can use any character on your keyboard.
    
12. Once the passphrase has been entered select Apply Changes at the bottom of the page.