Audio Receiver code for Yamaha YSP3300

I've managed to get this to work with code 1797. Weird thing is that I need to point the remote towards the floor for it to work. Pointing it to the soundbar or any other direction does not respond at all. Well, at least it's working.

seicam,

Sorry to be so slow to respond, but with the holidays and all, I hope you understand.

I believe that the only audio out from the Xbox One is over the optical link. Therefore, you have to connect the optical out of the Xbox to one of the optical inputs on your receiver and then select that audio input to get the Xbox and Live TV audio. For
the video, you may have to bypass the receiver altogether. Here is how my setup is configured (the Yamaha gets audio only from the Xbox One):

DirecTV receiver --> Xbox One --> TV

Yamaha A/V receiver <---'

I never thought about taking the HDMI out from the Xbox and through the A/V receiver. This may work, but you will still have to associate the audio with the optical input from the Xbox. This is done through the menus on your Yamaha system. You need to
select the HDMI input for the Xbox and then there should be setup options for the audio to use. You then select the optical input that the Xbox is connected to as the default audio input for that particular HDMI input. If you're not sure how to do this,
Yamaha support can walk you through the process.

I have the same problem, also with a Yamaha receiver (RX-V685). Audio arrives about 100 ms late.

RWBill,

Thanks for your words of support!

I did call Yamaha and they confirmed that when switching the audio input to the optical port, it disables the HDMI audio pass through as this would normally create a loop that would, of course, cause problems.

So, as a result of this, I had to connect my DirecTV receiver directly to the Xbox One and bypass the Yamaha receiver entirely. I then moved the HDMI output from the receiver to another input on the TV and all is working well now. It's not my ideal setup
as I would still prefer to switch everything via the Yamaha, but it's a workable solution.

Can you explain this a bit more? I have a slightly different setup and trying to get it to work.

I have the following:

- Comcast Settop box

- Xbox one

- Yamaha receiver

- LG TV

I have connected:

Settop to Xbox, through HDMI

Xbox to Yamaha, through HDMI

LG TV was already connected to Yamaha, and I have been switching everything thorough Yamaha already.

Everything works fine except one thing - audio for Live TV. I have audio for games, video, etc, everything that comes from Xbox directly. Live TV video works, but no audio. I have gone through the Live TV setup and Xbox correctly controls the settop box
(channels up/down).

Previously the settop box was connected directly to Yamaha, through the same HDMI, and everything worked.

Any ideas?