Arris Arris NVG599: Xbox One X - High Latency Problems

Kinda blurry, but its not hard to see the digits in the Latency

So after my Xbox had its latest update. Now in my network settings it connects but under NAT type it say UPNP not successful. I constantly have to go offline thwn back online for Xbox to connect to internet but it is now saying about the upnp all the time.
What can i do

Check this link for a possible solution:
https://support.xbox.com/en-US/xbox-one/networking/nat-error-solution

If you can't find it contact your ISP

Hello there lovestheganja28!

If you have tried the previously posted troubleshooting steps, then can I ask, how are you connected?

Wired or wirelessly?

Does it recognize that your network is set up at all?

If it does, what happens when you go to Network Settings and test your Multiplayer Connection?

If the previously posted steps didn't help, then I would try referring to our guide entitled ”I get an error message when I run
the ‘Test multiplayer connection’ on Xbox One” and/or make sure that your network is setup the way it's outlined on our support page

Network settings on Xbox One.

Give that information a look through and let us know how that helped with the issue you're dealing with.

Thanks!

Sounds like both the Arris and E900 by default use a LAN IP of 192.168.1.1. You will need to change the LAN IP of one or the other from 192.168.1.1 to 192.168.1.X (where X makes an unused IP outside the range that the Arris is configured to hand out via
DHCP). To change it on the E900, you will probably need to temporarily unplug the Arris. You may have to set your PC to a static IP of 192.168.1.X to reach the E900 but try without first.