AG10: I Can't connect my hotspot with my Xbox one

Hi again and sorry for the late reply. Maybe a misunderstanding: "You shoul only change the DNS!"

Either you use an IP from the range of your router/modems or, if you don't know it, you leave everything on automatically and write it down. You can then use them for manual setting.

I tried the settings ...clean bro wsing was the only one that changed anything but not when i try to connect it says "cannot get an ip adress" any ideas on how to solve this ?

Hi eoin Connell,

Thanks for updating us with your replies. If you haven't already done so, I'd recommend trying the troubleshooting available in our Xbox
One Network Connection Error Solution to try the different solutions for the error messages you're receiving.

Alternatively, as you're attempting to connect to a mobile hotspot, you may also wish to reach out to your mobile carrier to see if there are any specific limitations to what you're trying to achieve in connecting as hotspots are not governed in the same
way as traditional WiFi or Ethernet connections with ISPs (internet service providers).

I hope that this information helps you out a bit more.

Let us know the results.

It didn't work and still says the same thing..if u have any other suggestions it would be appreciated

Hi eoin connell,

sorry to hear. If you want you can change your dns
for example to

[table][tr][td]Google[/td][td]8.8.8.8[/td][td]8.8.4.4[/td][/tr][tr][td]Quad9[/td][td]9.9.9.9[/td][td]149.112.112.112[/td][/tr][tr][td]OpenDNS Home[/td][td]208.67.222.222[/td][td]208.67.220.220[/td][/tr][tr][td]Cloudflare[/td][td]1.1.1.1[/td][td]1.0.0.1[/td][/tr][tr][td]CleanBrowsing[/td][td]185.228.168.9[/td][td]185.228.169.9[/td][/tr][tr][td]Verisign[/td][td]64.6.64.6[/td][td]64.6.65.6[/td][/tr][tr][td]Alternate DNS[/td][td]198.101.242.72[/td][td]23.253.163.53[/td][/tr][tr][td]AdGuard DNS[/td][td]176.103.130.130[/td][td]176.103.130.131[/td][/tr][/table]

like this:

To get to the Network screen:

1. Press the Xbox button
   to open the guide.
2. Select Settings.
3. Select All Settings.
4. Select Network.
5. Select Network settings.

The Network screen is divided into three columns. This page describes network settings options that are available from each of these columns.

You have to choose the Advanced settings screen. If you've set up your home network to use Static IP addresses, or you want to manually configure your DNS settings.

Hope this helps and please keep us informed