Actiontec ActionTec MI424WR: Mafia III

Actiontec (Modems/Gateways) ActionTec MI424WR: Mafia III
Mafia III is not working for me. There is no way to get weapons delivered, as it claims. LB button brings up my weapons, but I can not find a way to call for them to deliver ammo. Does anyone know how to fix it? Sorry for posting it under Actiontec M1424WR
but they do not have Mafia III on the drop down list.

:)

 

BLACK OPS 2 NETWORK CONNECTION LOST EVERY TIME

Hi,

Verify firmware of your Router its updated.
screenshots.portforward.com/.../Firmware_Upgrade.htm

Verify UPnP setting (Must be enabled).
screenshots.portforward.com/.../Universal_Plug_and_Play.htm

Verify if have ports to be open/forward
portforward.com/cports.htm Search for Game that you have issues. (Cntl+F) /
support.xbox.com/.../network-ports-used-xbox-live

NAT Configuration.
screenshots.portforward.com/.../Static_NAT.htm

Here can find other configuration fo your router.
http://screenshots.portforward.com/Actiontec/MI424WR-GEN2_Rev_F/

Please post the results !

 

Actiontec ActionTec MI424WR: Overview

Actiontec (Modems/Gateways) ActionTec MI424WR: Overview
Actiontec MI 424-WR

Login Information

• Gateway - 192.168.1.1
• Username - admin
• Password - MI424-WR *Rev A - Rev D* create a password/password1/Serial number on back of device (While entering in password it will pop up with three *** for every letter you type in)
  

MI424-WR *Rev E* (Generation 3) There is a new 'Password' on sticker to log into the router. If sticker is damaged or code doesn’t work, Verizon should be able to look it up in their system. Also too many failed attempts will cause you to
be locked out for an unknown period of time.

How to Find SSID (Network Name)

1. Open a web browser.
2. Enter 192.168.1.1 in the address bar.
3. This device has several sets of login information:
   
   (admin/password, admin/password1, admin/password on sticker, admin/serial number beginning with CSJ)
   
4. Click Wireless Settings.
5. The SSID will be located on this page labeled SSID.

How To Find Wireless Passphrase (WPA/WEP)

1. Open a web browser.
2. Enter 192.168.1.1 in the address bar.
3. This device has several sets of login information:
   
   (admin/password, admin/password1, admin/password on sticker, admin/serial number beginning with CSJ).
   
4. Click Wireless Settings.
5. Verify wireless passphrase on the status page.

Changing Wireless Security Type/ Disabling Wireless Security

1. Open a web browser.
2. Enter 192.168.1.1 in the address bar.
3. This device has several sets of login information:
   
   (admin/password, admin/password1, admin/password on sticker, admin/serial number beginning with CSJ).
   
4. Click Wireless Settings.
5. Select Advanced Security Settings.
6. To turn off the security: Click Wireless Settings.
7. Select Basic Security Settings on the left.
8. Select Off in section 4.
9. Click Apply.
10. Select Desired security mode. (WEP, WPA, WPA2)
11. Enter a password for Pre-Shared Key.
12. Select Apply.

MAC Filtering

1. Open a web browser.
2. Enter 192.168.1.1 in the address bar.
3. This device has several sets of login information:
   
   (admin/password, admin/password1, admin/password on sticker, admin/serial number beginning with CSJ)
   
4. Click Wireless Settings.
5. From the menu on the left select Advanced Security Settings.
6. Select Wireless MAC Authentication.
7. Uncheck the Enable Access List box.

Change Wireless Channel

1. Open a web browser.
2. Enter 192.168.1.1 in the address bar.
3. This device has several sets of login information:
   
   (admin/password, admin/password1, admin/password on sticker, admin/serial number beginning with CSJ).
   
4. Click Wireless Settings.
5. From the menu on the left select Basic Security Settings.
6. Section 3.Channel contains the channel selection.
7. Select from the drop down menu channel. (1,3,9 or 11)
8. Click Apply.

Change Wireless Mode

1. Open a web browser.
2. Enter 192.168.1.1 in the address bar.
3. This device has several sets of login information:
   
   (admin/password, admin/password1, admin/password on sticker, admin/serial number beginning with CSJ)
   
4. Click Wireless Settings.
5. From the menu on the left select Advanced Security Settings.
6. In the Level 3 section select 802.11b/g/n Mode.
7. From the drop down select 802.11g only.
8. Click Apply.

Change Wireless Band (Width)

*This device only supports the 20Mhz Band*





DHCP Reservation

1. Open a web browser.
2. Enter 192.168.1.1 in the address bar.
3. This device has several sets of login information: (admin/password, admin/password1, admin/password on sticker, admin/serial number beginning with CSJ).
   
4. From the menu at the top select Advanced.
5. Select IP Address Distribution on bottom right.
6. Click the Connection List button.
7. Click the Edit action button on the right of the Xbox client.
8. Put a check mark on in the box labeled Static Lease Type.
9. Select Apply.

UPnP

1. Open a web browser.
2. Enter 192.168.1.1 in the address bar.
3. This device has several sets of login information:
   
   (admin/password, admin/password1, admin/password on sticker, admin/serial number beginning with CSJ).
   
4. From the menu across the top select Advanced.
5. Click Yes on the warning screen.
6. From the following menu click Universal Plug and Play.
7. Toggle the Allow Other Network Users to Control Wireless Broadband Router's Network Features.
   
8. Make sure that Enable Automatic Cleanup of Old Unused UPnP Service is enabled.
   
9. Click Apply.

DMZ

1. Open a web browser.
2. Enter 192.168.1.1 in the address bar.
3. This device has several sets of login information:
   
   (admin/password, admin/password1, admin/password on sticker, admin/serial number beginning with CSJ).
   
4. From the menu at the top choose Firewall Settings.
5. Select Yes when prompted to proceed.
6. From the menu on the left select DMZ Host.
7. Check the DMZ Host IP Address box.
8. Enter the IP Address of your Xbox Console in the boxes to the right.
9. Click Apply.

Disable DMZ

1. Open a web browser.
2. Enter 192.168.1.1 in the address bar.
3. This device has several sets of login information:
   
   (admin/password, admin/password1, admin/password on sticker, admin/serial number beginning with CSJ).
   
4. From the menu at the top choose Firewall Settings.
5. Select Yes when prompted to proceed.
6. From the menu on the left select DMZ Host.
7. Uncheck the DMZ Host IP Address box.
8. Click Apply.

Port Forwarding

1. Open a web browser.
2. Enter 192.168.1.1 in the address bar.
3. This device has several sets of login information: (admin/password, admin/password1, admin/password on sticker, admin/serial number beginning with CSJ).
   
4. From the menu at the top choose Firewall Settings.
5. Select Yes when prompted to proceed.
6. From the menu on the left select Port Forwarding.
7. Select the "New Entry" link.
8. Check the box for "Specify Network IP Address" and enter the IP Address of the Xbox.
   
9. In the dropdown box labeled Protocols select Show All Services.
10. Select Xbox Live from the next dropdown menu.
11. In the dropdown box labeled "Forward to Port" select "Same as Incoming Port".
    
12. Select OK.
13. Select Apply on the next screen.

Disable Port Forwarding

1. Open a web browser.
2. Enter 192.168.1.1 in the address bar.
3. This device has several sets of login information: (admin/password, admin/password1, admin/password on sticker, admin/serial number beginning with CSJ).
   
4. From the menu at the top choose Firewall Settings.
5. Select Yes when prompted to proceed.
6. From the menu on the left select Port Forwarding.
7. Find the rule you want to remove and check the Delete box.
8. Click Apply.

Firewall

1. Open a web browser.
2. Enter 192.168.1.1 in the address bar.
3. This device has several sets of login information: (admin/password, admin/password1, admin/password on sticker, admin/serial number beginning with CSJ).
   
4. From the menu at the top choose Firewall Settings.
5. Select Yes when prompted to proceed.
6. From the menu on the left select General.
7. Select "Minimum Security (Low)".
8. Select Apply.

How To Find Firmware Version

1. Open a web browser.
2. Enter 192.168.1.1 in the address bar.
3. This device has several sets of login information:
   
   (admin/password, admin/password1, admin/password on sticker, admin/serial number beginning with CSJ).
   
4. Select Main at the top.
5. Select Router Status on the left.
6. The firmware version will be located on this page labeled Firmware Version.

Firmware Update

*Firmware updates are installed automatically by the Internet Service Provider.*



Restore Factory Defaults

Through Firmware

1. Open a web browser.
2. Enter 192.168.1.1 in the address bar.
3. This device has several sets of login information:
   
   (admin/password, admin/password1, admin/password on sticker, admin/serial number beginning with CSJ).
   
4. From the menu across the top select Advanced.
5. Click Yes on the warning screen.
6. From the following menu click Restore Defaults.
7. Click Restore Defaults.
8. Click Ok on the following screen.

Through Hardware

1. Plug the computer into a LAN port via an ethernet cable.
2. Locate the reset button on the device.
3. With paperclip/pen/toothpick hold down the reset button down for 30 seconds.
4. Wait for lights to turn off then return to normal.

Bridging Guide

*Bridge mode should only be used if you have a router to plug into the device.*

*Please have PPPoE information available, if you do not have this, please contact your ISP.*


*If you have Fios T.V. service call your ISP for directions on how to configure the network.*

1. Open a web browser.
2. Enter 192.168.1.1 in the address bar.
3. This device has several sets of login information:
   
   (admin/password, admin/password1, admin/password on sticker, admin/serial number beginning with CSJ)
   
4. Select My Network from the menu at the top.
5. Select Network Connections from the menu on the left.
6. Click on Broadband Connection DSL.
7. If the connection is using PPPoE, proceed to the next step. If the connection is using DHCP, you will need to click on "Release" and then proceed to the next step.
   
8. Locate the "VCs" section, find the line that is enabled and click on the edit button on the right hand side (looks like a little notepad)
   
9. Change the protocol from PPPoE to Bridge. If the connection is using DHCP, it should already be set to Bridge
   
10. Once the protocol has been changed to Bridge, make sure that the "Bridge Mode" option is set to just “Bridge”
    
11. Click Apply.
12. Select My Network from the menu at the top.
13. Select Network Connections from the menu on the left.
14. Select LAN.
15. Uncheck "Private LAN DHCP Server Enable".
16. Click Apply.
17. If necessary enter the PPPoE settings into the router.

Known Issues

There is a known issue with the device where a customer may develop an issue with NAT type after having an open NAT time for a long period of time. There are a few solutions that may remedy this. It may be necessary to go into the port forwarding section
and delete any listings for Xbox or that point to port 3074. It may also be necessary to go into the UPnP section and check “Enable automatic cleanup of old unused UPnP services” and change the WAN Connection Publication box to “Publish all WAN Connections”.

With Revision I the UPnP option has been hidden and is only accessible through a direct link.

Found
HERE.



Multiple Console Support

We have confirmed that this network device is unable to support more than one console with an Open NAT consistently.



Device Manual



This Device has several Revision Types as well as different firmware versions.



ActionTec: Frontier Firmware: Verizon:

Revision: A,C,D &

E
E, G & I E,

F & I

*Choose your Brand/Carrier and Click the appropriate Revision.*