2Wire: Damaged Xbox one consoles??

I think I may have confused you with my suggestion, by connecting the failing Xbox directly to the router. In this equation, I'm not referring to your Linksys E1200, but instead the 2wire gateway.

You mentioned that you already have one of your Xbox 360's connected directly to the router/modem (2wire). I would like you to try with the exact same setup as your working Xbox 360, but with the failing 360 machine connected directly to your 2wire gateway,
without the Linksys E1200 in transit, or any other networking device for that matter. With the exception for the failing Xbox 360 and your 2wire gateway.

Topology:

2wire (gateway) ------ Ethernet -------
Xbox 360 (the failing console).

Before you go ahead, go to Xbox System Settings and select
Network settings. Select connection type and Configure Network. On the
Additional settings tab select Restore network settings to factory settings.

Turn off your Xbox.

Turn off your 2wire gateway and let it sit for a couple of minutes.

Turn on the 2wire and wait one minute for it to connect properly and wire your failing Xbox 360 the exact same way as your working Xbox 360.

Now on your console, head back to Network Settings and select
Test Xbox Live Connection.

Post back and let us know how that goes and we'll go from there.

Thanks!

Sorry for the late reply!

[quote user="Cartoonite"]I finally got a working network cable running up through the walls into the room and connected the 360 directly to the 2wire modem.[/quote]Did you actually have your Xbox 360 directly connected to the 2wire gateway, or did you have
any networking device connected in between this path?

It would be great if you are able to find out the model number of your 2wire gateway.

Could you try, once more, to directly connect your Xbox 360 with an Eternet Cable to the 2wire gateway, but this time, make sure you disconnect your second Xbox 360, along with the Xbox One, from your network.

Disable UPnP and reboot your 2wire gateway.

Enable UPnP and reboot your 2wire gateway.

This procedure will refresh the map table.

If it's possible, are you able to try and connect your console on a different network (friends house), to verify if this is exclusively tied to your network, or not.

Keep us posted!

It is a 2wire 2701HG-B. I believe it is a modem/router. I have two different Ethernet cords running from the 2wire, it can have up to 4. One runs to my PC, the other runs to my Xbox.

So if ATT can't give me a compatible router, I guess I have to go out and buy one that is compatible. Any chance XBOX is going to make 2WIRE compatible?? Any chance that they could let customers know up front that 2Wire routers are not compatible. I clearly
told thesales agent at Dell that I had ATT 2Wire router when I bought the XBOX from them.

Hey Lode,

Enforcement.xbox.com would be the only site of communication for the enforcement team.