What does it mean when my xbox series s power button blocks rapidly in a series of 2 blinks?

My name is Fernando I'm an independent consultant, I'm happy to help.

Try this procedure, hope it helps: Plug the power cord back into your Xbox Series X|S; Turn on the control; Press and hold the sync button on your Xbox Series X|S; Press the sync button on the controller until the time it starts flashing rapidly, then release it.

Hope I helped and see you soon

If your Xbox Series X controller blinks twice, it usually means that the batteries are low or the connection with the console has been lost. Here's what you can try:

1. Replace the batteries: If the batteries are low, the controller will blink twice repeatedly. Try replacing the batteries with fresh ones and see if it solves the problem.

2. Re-sync the controller: To re-sync the controller with the console, press and hold the pairing button on the console until the light starts flashing. Then, press and hold the pairing button on the controller until the light on the controller begins to blink rapidly. Wait a few seconds for the controller to connect.

3. Check for interference: Certain wireless devices or objects may interfere with the controller's signal. Make sure there aren't any devices or obstacles blocking the signal between the controller and the console.

If none of the above solutions work, you may need to contact Xbox support for further assistance.

The Series X is physically larger than the Series S and has a disc drive where the Series S does not. The X will be more powerful and run games in true 4K.

This article has a pretty good side by side comparison of the specs. https://www.pcmag.com/news/xbox-series-x-vs-xbox-series-s-whats-the-difference

You mean xbox one s

Not series ?

Xbox series s isn't the same as xbox one s

Xbox one games are just xbox one games .

Series consoles have s or x requirements physical or digital plus the power difference

I had the same exact problem and what worked for me was power cycling my Xbox series s by:

1. Power on

2. Hold power button on console for 10 seconds

3. Unplug power cable

4. Hold power button again for 10 seconds

5. Wait for 60-120 seconds

6. Plug back in

7. Press Xbox button and start playing!