Zyxel Zyxel C1000z: MAC Filtering

Zyxel (Modems/Gateways) Zyxel C1000z: MAC Filtering
Login Information

• Gateway: 192.168.0.1
• Username: admin
• Password: (located on the bottom of the device)

MAC Filtering

1. Connect a computer to the gateway with an Ethernet cable.
2. Open a web browser on a computer.
3. Type the gateway address: 192.168.0.1 into the web address bar, select
   apply.
4. This will take you to a login page, type admin for the username and password (located on the bottom of the device).
   
5. Select Wireless Setup on the main page.
6. On the left hand side select MAC Authentication.
7. In the “SSID” drop down select the desired Wireless network name to enable MAC filtering.
   
8. Alternatively you can select ALL SSID’s to enable MAC filtering on all wireless networks from this device.
   
9. Next to “MAC Authentication” select Enable.
10. Select Allow Device List.
11. Select the device you would like to add next to “Select Device Name”. Or manually enter in the MAC address.
    
12. Select the Apply button to save changes.

Disable MAC Filtering

1. Connect a computer to the gateway with an Ethernet cable.
2. Open a web browser on a computer.
3. Type the gateway address: 192.168.0.1 into the web address bar, select
   apply.
4. This will take you to a login page, type admin for the username and password (located on the bottom of the device).
   

:)

 

Connection interrupted

Thanks for the reply I am running on a ZyXel C1000Z

 

Suddenly can't connect to Internet on 360

Greetings Phane7!

May I ask, is your ZyXEL C1000Z operating in bridge mode, or router/NAT mode?

If it's possible, can you try connect your Xbox directly in to the ZyXEL C1000Z, and verify if you can connect properly to Live, or not.

Thanks!