Zyxel: Wireless Security

Zyxel (Modems/Gateways): Wireless Security
Login Information

• Gateway: 192.168.1.1
• Username: admin
• Password: 1234

How To Find Wireless Passphrase (WPA/WEP)

From Firmware:

1. Connect a computer to the gateway with an Ethernet cable.
2. Open a web browser on a computer.
3. Type the gateway address: 192.168.1.1 into the web address bar, select
   apply.
4. This will take you to a login page, type admin for the username and type
   1234 for the password.
5. Select Network on the main page.
6. Select Wireless LAN.
7. Under the General tab the current Security Mode will show you if there is a password or not.
   

Changing Wireless Security Type/ Disabling Wireless Security

1. Connect a computer to the gateway with an Ethernet cable.
2. Open a web browser on a computer.
3. Type the gateway address: 192.168.1.1 into the web address bar, select
   apply.
4. This will take you to a login page, type admin for the username and type
   1234 for the password.
5. Select Network on the main page.
6. Select Wireless LAN.
7. Select the dropdown box for Security Mode to select the desired wireless security.
   
8. Select Apply to save changes.

:)

 

Zyxel: Wireless Security

Zyxel (Modems/Gateways): Wireless Security
Zyxel Q1000z



Login Information

Gateway - 192.168.0.1

Username - none

Password - none



How To Find Wireless Passphrase (WPA/WEP)

1. Plug the computer into a LAN port via an ethernet cable.
2. Open a web browser.
3. Log into the router by entering the default gateway (192.168.0.1) into the address bar of the internet browser.
   
4. Click on Wireless Setup from the menu at the top.
5. Click on Wireless Security from the menu on the left.
6. The Wireless Passphrase will be displayed next to Security Key/Passphrase.

Changing Wireless Security Type/ Disabling Wireless Security

1. Plug the computer into a LAN port via an ethernet cable.
2. Open a web browser.
3. Log into the router by entering the default gateway(192.168.0.1) into the address bar of the internet browser.
   
4. Click on Wireless Setup from the menu at the top.
5. Click on Wireless Security from the menu on the left.
6. From the drop down labeled "Security Type", select the desired security type. If no wireless security is desired, select "Security Off".
   
7. Click the Apply button at the bottom of the page.

 

Zyxel: Wireless Security

Zyxel (Modems/Gateways): Wireless Security (P650H/HW Only)
Zyxel P-650 Series

Login Information

Gateway - 192.168.1.1

Username - N/A

Password - 1234



How To Find Wireless Passphrase (WPA/WEP)

1. Plug the computer into a LAN port via an ethernet cable.
2. Open a web browser.
3. Log into the router by entering the default gateway into the address bar of the internet browser. Example 192.168.1.1
   
4. The router will then prompt you to enter the username and password. There is no username and the default password is 1234.
   
5. Click Wireless LAN, Wireless to open the Wireless screen.
6. On the Wireless Screen the wireless key will be listed in the selected Key 1-4 field.
   

Changing the Wireless Security Type (P650H/HW Only)/Disabling Wireless Security

1. Plug the computer into a LAN port via an ethernet cable.
2. Open a web browser.
3. Log into the router by entering the default gateway into the address bar of the internet browser. Example 192.168.1.1
   
4. The router will then prompt you to enter the username and password. There is no username and the default password is 1234.
   
5. Click Wireless LAN, Wireless to open the Wireless screen.
6. WEP Encryption is the only security type available for home use.
7. To disable security select Disable from the WEP Encryption drop down.