Zyxel: Overview

Discus and support Zyxel: Overview in XboX Networking Hardware to solve the problem; Zyxel (Modems/Gateways): Overview Login Information Gateway: 192.168.1.1 Username: admin Password: 1234 How to Find SSID (Network Name)... Discussion in 'XboX Networking Hardware' started by XB1R Hydros, Jul 4, 2014.

  1. XB1R Hydros
    XB1R Hydros Guest

    Zyxel: Overview


    Zyxel (Modems/Gateways): Overview
    Login Information



    • Gateway: 192.168.1.1
    • Username: admin
    • Password: 1234


    How to Find SSID (Network Name)

    1. Connect a computer to the gateway with an Ethernet cable.
    2. Open a web browser on a computer.
    3. Type the gateway address: 192.168.1.1 into the web address bar, select
      apply.
    4. This will take you to a login page, type admin for the username and type
      1234 for the password.
    5. Select Network on the main page.
    6. Select Wireless LAN.
    7. Your current SSID will be shown on this page. You can also change the SSID from here as well.


    How To Find Wireless Passphrase (WPA/WEP)

    From Firmware:

    1. Connect a computer to the gateway with an Ethernet cable.
    2. Open a web browser on a computer.
    3. Type the gateway address: 192.168.1.1 into the web address bar, select
      apply.
    4. This will take you to a login page, type admin for the username and type
      1234 for the password.
    5. Select Network on the main page.
    6. Select Wireless LAN.
    7. Under the General tab the current Security Mode will show you if there is a password or not.


    Changing Wireless Security Type/ Disabling Wireless Security

    1. Connect a computer to the gateway with an Ethernet cable.
    2. Open a web browser on a computer.
    3. Type the gateway address: 192.168.1.1 into the web address bar, select
      apply.
    4. This will take you to a login page, type admin for the username and type
      1234 for the password.
    5. Select Network on the main page.
    6. Select Wireless LAN.
    7. Select the dropdown box for Security Mode to select the desired wireless security.
    8. Select Apply to save changes.


    MAC Filtering

    1. Connect a computer to the gateway with an Ethernet cable.
    2. Open a web browser on a computer.
    3. Type the gateway address: 192.168.1.1 into the web address bar, select
      apply.
    4. This will take you to a login page, type admin for the username and type
      1234 for the password.
    5. Select Network on the main page.
    6. Select Wireless LAN.
    7. Select MAC Filter.
    8. Next to MAC Restrict Mode select the Allow option.
    9. Select the Add button.
    10. Type in the wireless devices MAC address you would like to add.
    11. Select the Apply button to add the device.
    12. Continue to add devices from your network using the Add button.
    13. Select Apply to save the changes.


    Disable MAC Filtering

    1. Connect a computer to the gateway with an Ethernet cable.
    2. Open a web browser on a computer.
    3. Type the gateway address: 192.168.1.1 into the web address bar, select
      apply.
    4. This will take you to a login page, type admin for the username and type
      1234 for the password
    5. Select Network on the main page.
    6. Select Wireless LAN.
    7. Select MAC Filter.
    8. Next to MAC Restrict Mode select the Disabled option.
    9. Select Apply to save the changes.


    Change Wireless Channel

    There is no option to change the wireless channel



    Change Wireless Mode

    1. Connect a computer to the gateway with an Ethernet cable.
    2. Open a web browser on a computer.
    3. Type the gateway address: 192.168.1.1 into the web address bar, select
      apply.
    4. This will take you to a login page, type admin for the username and type
      1234 for the password.
    5. Select Network on the main page.
    6. Select Wireless LAN.
    7. Select Advanced Setup.
    8. Next to 802.11 Mode.
    9. Select Apply to save the changes.


    Change Wireless Band (Width)

    1. Open a web browser on a computer.
    2. Type the gateway address: 192.168.1.1 into the web address bar, select
      apply.
    3. This will take you to a login page, type admin for the username and type
      1234 for the password.
    4. Select Network on the main page.
    5. Select Wireless LAN.
    6. On the “General tab” on the top of the screen, locate the Bandwidth drop down menu.
    7. Click the drop down menu and select the 20MHz.
    8. Select the Save/Apply button.


    DHCP Reservation

    There is no option to reserve DHCP.



    UPnP

    1. Open a web browser on a computer.
    2. Type the gateway address: 192.168.1.1 into the web address bar, select
      apply.
    3. This will take you to a login page, type admin for the username and type
      1234 for the password.
    4. Select Advanced on the main page.
    5. On the “General” tab check the Activate Universal Plug and Play (UPnP) feature.
    6. Select Apply once you have finished to save changes.


    DMZ

    1. Open a web browser on a computer.
    2. Type the gateway address: 192.168.1.1 into the web address bar, select
      apply.
    3. This will take you to a login page, type admin for the username and type
      1234 for the password.
    4. Select Network on the main page.
    5. Select NAT.
    6. Select the DMZ Host tab.
    7. Enter the IP address in the “default server” of the Xbox on your network.
    8. Select Apply once you have finished to save changes.


    Disable DMZ

    1. Open a web browser on a computer.
    2. Type the gateway address: 192.168.1.1 into the web address bar, select
      apply.
    3. This will take you to a login page, type admin for the username and type
      1234 for the password.
    4. Select Network on the main page.
    5. Select NAT.
    6. Select the DMZ Host tab.
    7. Remove the IP address in the “default server” of the Xbox on your network.
    8. Select Apply once you have finished to save changes.


    Port Forwarding

    1. Open a web browser on a computer.
    2. Type the gateway address: 192.168.1.1 into the web address bar, select
      apply.
    3. This will take you to a login page, type admin for the username and type
      1234 for the password.
    4. Select Network on the main page.
    5. Select NAT.
    6. Under the Port Forwarding tab you have options to add ports.
    7. Under the Service Name select “User Define”. This will open Rule Setup where you can manually enter the port numbers and select the IP protocol.
    8. Select Apply to save the changes.


    Disable Port Forwarding

    1. Open a web browser on a computer.
    2. Type the gateway address: 192.168.1.1 into the web address bar, select
      apply.
    3. This will take you to a login page, type admin for the username and type 1234 for the password.
    4. Select Network on the main page.
    5. Select NAT.
    6. Under the Port Forwarding tab locate the active ports rules.
    7. Select the small Trash Can icon under the “modify” category to remove the port rule.
    8. Select Apply to save changes.


    Firewall

    There are no firewall settings that effect the Xbox.



    How to Find Firmware Version

    1. Open a web browser on a computer.
    2. Type the gateway address: 192.168.1.1 into the web address bar, select
      apply.
    3. This will take you to a login page, type admin for the username and type
      1234 for the password.
    4. Select Maintenance on the main page.
    5. Select Tools.
    6. Select Firmware.
    7. On the Firmware page the current firmware will be located midway on the page.


    Firmware Update

    Note: Firmware will be provided to you when you check for firmware update.

    1. Connect a computer to the gateway with an Ethernet cable.
    2. Open a web browser on a computer.
    3. Type the gateway address: 192.168.1.1 into the web address bar, select
      apply.
    4. Select Maintenance on the main page.
    5. Select Tools.
    6. Select Firmware.
    7. Select the Browse option.
    8. Locate the firmware file on your computer and select it.
    9. Select the Upload button to begin the firmware update.
    10. Please be patient the update may take several minutes.


    Restore Factory Defaults

    From Hardware:

    1. Locate the back of the device, where the Ethernet port are located.
    2. Hold the reset button on the back for 30 seconds. You will need a paperclip, toothpick or pen to hold down the reset button.
    3. Let go of the reset button and wait about 1 minute for the device to reboot.


    From Firmware:

    1. Connect a computer to the gateway with an Ethernet cable.
    2. Open a web browser on a computer.
    3. Type the gateway address: 192.168.1.1 into the web address bar, select
      apply.
    4. This will take you to a login page, type admin for the username and type
      1234 for the password
    5. Select Maintenance on the main page.
    6. Select Tools.
    7. Select the Configuration tab.
    8. Select the Reset button.
    9. Wait for the device to reboot, this may take a few minutes.




    Entering PPPoE

    Note: You will need the have the PPPoE information beforehand. Contact your ISP if you need to collect this information.



    1. Connect a computer to the gateway with an Ethernet cable.
    2. Open a web browser on a computer.
    3. Type the gateway address: 192.168.1.1 into the web address bar, select
      apply.
    4. This will take you to a login page, type admin for the username and type
      1234 for the password.
    5. Once logged in Select Network.
    6. Select the WAN Configuration option.
    7. Select the PPPoE option.
    8. Enter the PPP Username.
    9. Enter the PPP Password.
    10. Enter the PPPoE Service Name.
    11. Check the Enable NAT box.
    12. Check the Enable Full cone NAT box.
    13. Check the Enable Firewall box.
    14. Select the Next button. Continue to follow the prompts to save changes.
    15. The device will reboot.


    Known Issues

    There are no currently known issues with this device.



    Multiple console Support

    We have confirmed that this network device is unable to support more than one console with an Open NAT.



    Device Manual

    Click here for the manual.

    :)
     
    XB1R Hydros, Jul 4, 2014
    #1
  2. XBR Poseidon
    XBR Poseidon Guest
    Zyxel Zyxel PK5000z: Overview

    Zyxel (Modems/Gateways) Zyxel PK5000z: Overview
    Test Post, this is the bomb
     
    XBR Poseidon, Jul 4, 2014
    #2
  3. XBR Poseidon
    XBR Poseidon Guest
    Zyxel: Overview

    Zyxel (Modems/Gateways): Overview
    Zyxel Q1000z



    Login Information

    Gateway - 192.168.0.1

    Username - none

    Password - none



    How to Find SSID (Network Name)



    1. Plug the computer into a LAN port via an Ethernet cable.
    2. Open a web browser.
    3. Log into the router by entering the default gateway (192.168.0.1) into the address bar of the internet browser.
    4. Select Wireless Setup.
    5. The network name is listed next to Network Name. A new name can be set by typing in this box.
    6. Click the Apply button at the bottom of the screen.




    How To Find Wireless Passphrase (WPA/WEP)



    1. Plug the computer into a LAN port via an Ethernet cable.
    2. Open a web browser.
    3. Log into the router by entering the default gateway (192.168.0.1) into the address bar of the internet browser.
    4. Click on Wireless Setup from the menu at the top.
    5. Click on Wireless Security from the menu on the left.
    6. The Wireless Passphrase will be displayed next to Security Key/Passphrase.




    Changing Wireless Security Type/ Disabling Wireless Security



    1. Plug the computer into a LAN port via an Ethernet cable.
    2. Open a web browser.
    3. Log into the router by entering the default gateway (192.168.0.1) into the address bar of the internet browser.
    4. Click on Wireless Setup from the menu at the top.
    5. Click on Wireless Security from the menu on the left.
    6. From the drop down labeled "Security Type", select the desired security type. If no wireless security is desired, select "Security Off".
    7. Click the Apply button at the bottom of the page.




    MAC Filtering



    1. Plug the computer into a LAN port via an Ethernet cable.
    2. Open a web browser.
    3. Log into the router by entering the default gateway (192.168.0.1) into the address bar of the internet browser.
    4. Click on Wireless Setup from the menu at the top.
    5. Select MAC Authentication from the menu on the left.
    6. Select Disable next to MAC Authentication.
    7. Click the Apply button at the bottom of the screen.




    Change Wireless Channel




    1. Plug the computer into a LAN port via an Ethernet cable.
    2. Open a web browser.
    3. Log into the router by entering the default gateway (192.168.0.1) into the address bar of the internet browser.
    4. Click on Wireless Setup from the menu at the top.
    5. Click on Radio Setup from the menu at the left.
    6. From the drop down labeled "Channel", select the desired Channel. (Channels 1,3,9,11)
    7. Click Apply.




    Change Wireless Mode



    1. Plug the computer into a LAN port via an Ethernet cable.
    2. Open a web browser.
    3. Log into the router by entering the default gateway (192.168.0.1) into the address bar of the internet browser.
    4. Click on Wireless Setup in the menu at the top.
    5. From the menu on the left, click on Radio Setup.
    6. From the drop down labeled "802.11 Mode", select "802.11G only" mode.
    7. Click the Apply.




    Change Wireless Band (width)



    The wireless band (width) cannot be changed on this device. The default is 20 MHz.





    DHCP Reservation



    1. Open a web browser.
    2. Log into the router by entering the default gateway (192.168.0.1) into the address bar of the internet browser.
    3. From the menu at the top, click on Advanced Setup.
    4. Locate the section labeled IP Addressing from the menu on the left. Click on DHCP Reservation in this section.
    5. Select the Xbox from the drop down menu or enter the MAC Address manually.
    6. Select the desired IP Address and click Apply.




    UPnP



    1. Open a web browser.
    2. Log into the router by entering the default gateway (192.168.0.1) into the address bar of the internet browser.
    3. Click on Advanced Setup from the menu at the top.
    4. Check or uncheck the option for UPnP.
    5. Click Apply.




    DMZ



    1. Open a web browser.
    2. Log into the router by entering the default gateway (192.168.0.1) into the address bar of the internet browser.
    3. Click Advanced Setup from the menu at the top.
    4. Locate the section labeled "Security".
    5. Click on DMZ Host in that section.
    6. Select the radio button next to enable.
    7. Enter the IP address of the console where it says "Enter IP address" or select it from the Select Device drop down.
    8. Click Apply.


    Disable DMZ



    1. Open a web browser.
    2. Log into the router by entering the default gateway (192.168.0.1) into the address bar of the internet browser.
    3. Click Advanced Setup from the menu at the top.
    4. Locate the section labeled "Security".
    5. Click on DMZ Host in that section.
    6. Select the radio button next to disable.
    7. Click Apply.




    Port Forwarding



    1. Open a web browser.
    2. Log into the router by entering the default gateway (192.168.0.1) into the address bar of the internet browser.
    3. Click on Advanced Setup from the menu at the top.
    4. Click on Port Forwarding from the menu on the left.
    5. Set both starting and ending port to 3074.
    6. Set the Protocol to Both.
    7. Enter the IP Address of the Xbox.
    8. Click Apply.


    Disable Port Forwarding



    1. Open a web browser.
    2. Log into the router by entering the default gateway (192.168.0.1) into the address bar of the internet browser.
    3. Click on Advanced Setup from the menu at the top.
    4. Click on Port Forwarding from the menu on the left.
    5. Click the Remove button on any entries referring the Xbox or Port number 3074.




    Firewall



    1. Open a web browser.
    2. Log into the router by entering the default gateway (192.168.0.1) into the address bar of the internet browser.
    3. Click on Advanced Setup from the menu at the top.
    4. Locate the section labeled Security on the left and select Firewall.
    5. In section three, click on the drop down box labeled "Security Level" and select either Low or Off.
    6. Click the Apply button.


    How to Find Firmware Version



    1. Plug the computer into a LAN port via an Ethernet cable.
    2. Open a web browser.
    3. Log into the router by entering the default gateway (192.168.0.1) into the address bar of the internet browser.
    4. Click on Modem Status.
    5. The current version will be listed in the table below next to Firmware Version.




    Firmware Update



    1. Plug the computer into a LAN port via an Ethernet cable.
    2. Open a web browser.
    3. Navigate to http://192.168.0.1/utilities_upgradefirmware.html.
    4. Follow the onscreen instructions.




    Restore Factory Defaults



    Through Hardware

    1. Locate the Reset button.
    2. Using the tip of a ballpoint pen or toothpick press and hold the reset button for 15 seconds.
    3. Release the reset button.
    4. Wait for the device to restart.


    Through Firmware



    1. Plug the computer into a LAN port via an Ethernet cable.
    2. Open a web browser.
    3. Log into the router by entering the default gateway (192.168.0.1) into the address bar of the internet browser.
    4. Click on Utilities in the menu at the top.
    5. Click on Restore Defaults on the menu on the left.
    6. Click the Restore button next to the settings you wish to restore. (Most likely you will want to click on "Restore Modem to Factory Default State")
    7. Wait for the device to reset and restart.




    Bridging Guide



    *Bridge mode should only be used if you have a router to plug into the device.*



    *Please have PPPoE information available if needed to enter into the router (contact ISP if needed to get this information)*



    1. Open a web browser.
    2. Log into the router by entering the default gateway (192.168.0.1) into the address bar of the internet browser.
    3. Click on Quick Setup in the menu at the top.
    4. Scroll down and select Advanced IP Configuration.
    5. Select Transparent Bridging.
    6. Click Apply.




    Known Issues



    The reset button is easily broken on this device, so the preferred method of restoring to defaults is to use utilities and the restore factory defaults option.





    Multiple Console Support

    We have confirmed that this network device is unable to support more than one console with an Open NAT.



    Device Manual



    Click
    here
     
    XBR Poseidon, Jul 4, 2014
    #3
    Error:Failed to connect to localhost port 9200: Connection refused
Thema:

Zyxel: Overview