Zhone Zhone 6381-A2-GB23-10: Overview

Zhone (Modems/Gateways) Zhone 6381-A2-GB23-10: Overview
Zhone 6381-A2-GB23-10

Login Information:

Default Gateway – 192.168.1.1

Username – Admin

Password – Admin



How to Find SSID (Network Name)

This device is not capable of wireless.



How To Find Wireless Passphrase (WPA/WEP)

This device is not capable of wireless.



Changing Wireless Security Type/ Disabling Wireless Security

This device is not capable of wireless.



MAC Filtering

This device is not capable of wireless.



Change Wireless Mode

This device is not capable of wireless.



Change Wireless Channel

This device is not capable of wireless.



DHCP Reservation

1. Open a web browser and type http://192.168.1.1 .
   
2. Enter admin for both the Username and Password.
3. Click the Login button found in the lower right corner of the screen.
4. Select Advanced from the options across the top.
5. Select LAN Clients from the menu at the left.
6. Enter the desired IP Address in the Enter IP Address field.
7. Enter a host name if you desire.
8. Enter the MAC Address of your Xbox Console.
9. Click the Apply button at the bottom of the page.
10. Select Tools from the menu across the top.
11. Select System Commands from the menu at the left.
12. Click the Save All button to make the changes permanent.

UPnP

1. Open a web browser and type http://192.168.1.1 .
   
2. Enter admin for both the Username and Password.
3. Click the Login button found in the lower right corner of the screen.
4. Select Advanced from the tabs at the top.
5. Select UPnP from the menu on the left.
6. Toggle UPnP on or off depending on your need.
7. Click the Apply button at the bottom of the screen.
8. Select Tools from the tabs across the top.
9. Select System Commands from the menu on the left.
10. Click the Save All button.

DMZ

1. Open a web browser and type http://192.168.1.1 .
   
2. Enter admin for both the Username and Password.
3. Click the Login button found in the lower right corner of the screen.
4. Select Advanced from the menu across the top.
5. Select Port Forwarding from the menu on the left.
6. Select the IP Address of your Xbox console from the LAN IP drop down.
7. Click the DMZ link.
8. Click the Save/Apply button.
9. Select Tools from the tabs across the top.
10. Select System Commands from the menu on the left.
11. Click the Save All button.

Disable DMZ

1. Open a web browser and type http://192.168.1.1 .
   
2. Enter admin for both the Username and Password.
3. Click the Login button found in the lower right corner of the screen.
4. Select Advanced from the menu across the top.
5. Select Port Forwarding from the menu on the left.
6. Select the IP Address of your Xbox console from the LAN IP drop down.
7. Click the DMZ link.
8. Remove the Xbox console from the LAN IP drop down.
9. Click the Save/Apply button.
10. Select Tools from the tabs across the top.
11. Select System Commands from the menu on the left.
12. Click the Save All button.

Port Forwarding

1. Open a web browser and type http://192.168.1.1 .
   
2. Enter admin for both the Username and Password.
3. Click the Login button found in the lower right corner of the screen.
4. Select Advanced from the menu across the top.
5. Select Port Forwarding from the menu on the left.
6. Select Custom Port Forwarding.
7. Enter the IP Address of your Xbox console in the Server IP Address field.
8. For all 4 port fields enter 3074.
9. Set the protocol to both if available, if not create two rules one with UDP selected and another with TCP.
   
10. Click the Save/Apply button.
11. Select Tools from the tabs across the top.
12. Select System Commands from the menu on the left.
13. Click the Save All button.

Disable Port Forwarding

1. Open a web browser and type http://192.168.1.1 .
   
2. Enter admin for both the Username and Password.
3. Click the Login button found in the lower right corner of the screen.
4. Select Advanced from the menu across the top.
5. Select Port Forwarding from the menu on the left.
6. Select Custom Port Forwarding.
7. Select any entries regarding port 3074.
8. Click the Remove button.
9. Select Tools from the tabs across the top.
10. Select System Commands from the menu on the left.
11. Click the Save All button.

Firewall

*The firewall does not have any adjustable options.*



Restoring Factory Defaults

Through Firmware

1. Open a web browser and type http://192.168.1.1 .
   
2. Enter admin for both the Username and Password.
3. Click the Login button found in the lower right corner of the screen.
4. Select Management from the menu on the left.
5. Select Settings from the submenu.
6. Select Restore Default from the resulting menu.
7. Click the Restore Default Settings button.
8. Click Ok on the pop up window.

Through Hardware

1. Locate the reset button on the back of the device.
2. Press and hold the reset button for aprox. 5 seconds.
3. Release the button and wait for the device to restart.

How to Find Firmware Version

1. Open a web browser and type http://192.168.1.1 .
   
2. Enter admin for both the Username and Password.
3. Click the Login button found in the lower right corner of the screen.
4. Select Status from the menu across the top.
5. The Firmware version is found to the right of Software Version.

Firmware Update

1. Locate the updated firmware file either from
   http://www.zhone.com/support/ or from your internet service provider.
2. Connect a LAN cable from your pc to the gateway.
3. Open a web browser and type http://192.168.1.1 .
   
4. Enter admin for both the Username and Password.
5. Click the Login button found in the lower right corner of the screen.
6. Select Tools from the menu across the top.
7. Select Update Gateway from the menu on the left..
8. Click the Browse button.
9. Select the file that you obtained from your internet service provider.
10. Click the Upload Software button.

Bridging Guide

1. Open a web browser and type http://192.168.1.1 .
   
2. Enter admin for both the Username and Password.
3. Click the Login button found in the lower right corner of the screen.
4. From the Home page, click on Setup.
5. Click on New Connection. The default PPPoE connection setup is displayed.
   
6. At the Type field select Bridge and the Bridge connection setup page is displayed.
   
7. Give your Bridge connection a unique name; the name must not have spaces and cannot begin with numbers.
   
8. Set the PVC Sharing to Enable.
9. Enter a VPI and VCI. (Your DSL service provider or your ISP will supply these.)
   
10. Select the encapsulation type (LLC or VC); if you are not sure which to use, use the default mode.
    
11. Select the quality of service (QoS). Leave the default value if you are unsure or the ISP did not provide this information.
    
12. Click Apply.
13. Select Tools from the menu across the top.
14. Select System Commands from the menu at the left.
15. Click the Save All button to make the changes permanent.

Multiple Console Support

We have confirmed that this network device is unable to support more than one console with an Open NAT.



Known Issues

There are no known issues at this time.

Device Manual

Click
here for the manual.

:)

 

Zhone Zhone 6381-A2-GB23-10: MAC Filtering

Zhone (Modems/Gateways) Zhone 6381-A2-GB23-10: MAC Filtering
Zhone 6381-A2-GB23-10

Login Information:

Default Gateway – 192.168.1.1

Username – Admin

Password – Admin



MAC Filtering

This device is not capable of wireless.

 

Zhone Zhone 6381-A2-GB23-10: Known Issues

Zhone (Modems/Gateways) Zhone 6381-A2-GB23-10: Known Issues
Zhone 6381-A2-GB23-10

Login Information:

Default Gateway – 192.168.1.1

Username – Admin

Password – Admin



Known Issues

There are no known issues at this time.