Zhone Zhone 6212: Overview

Discus and support Zhone Zhone 6212: Overview in XboX Networking Hardware to solve the problem; Zhone (Modems/Gateways) Zhone 6212: Overview Device Name Zhone 6212 Login Information: Default Gateway – 192.168.1.1 Username – admin Password –... Discussion in 'XboX Networking Hardware' started by XBR Poseidon, Jul 6, 2014.

  1. XBR Poseidon
    XBR Poseidon Guest

    Zhone Zhone 6212: Overview


    Zhone (Modems/Gateways) Zhone 6212: Overview
    Device Name Zhone 6212

    Login Information:

    Default Gateway – 192.168.1.1

    Username – admin

    Password – admin



    How to Find SSID (Network Name)

    This device is not capable of wireless.



    How To Find Wireless Passphrase (WPA/WEP)

    This device is not capable of wireless.



    Changing Wireless Security Type/ Disabling Wireless Security

    This device is not capable of wireless.



    MAC Filtering

    This device is not capable of wireless.



    Change Wireless Mode

    This device is not capable of wireless.



    Change Wireless Channel

    This device is not capable of wireless.



    DHCP Reservation

    1. Open a web browser and type http://192.168.1.1 .
    2. Enter admin for both the Username and Password.
    3. Click the Login button found in the lower right corner of the screen.
    4. Select Advanced from the options across the top.
    5. Select LAN Clients from the menu at the left.
    6. Enter the desired IP Address in the Enter IP Address field.
    7. Enter a host name if you desire.
    8. Enter the MAC Address of your Xbox Console.
    9. Click the Apply button at the bottom of the page.
    10. Select Tools from the menu across the top.
    11. Select System Commands from the menu at the left.
    12. Click the Save All button to make the changes permanent.


    UPnP

    1. Open a web browser and type http://192.168.1.1 .
    2. Enter admin for both the Username and Password.
    3. Click the Login button found in the lower right corner of the screen.
    4. Expand the Advanced menu on the left.
    5. Select LAN from the sub-menu.
    6. Toggle UPnP on or off depending on your need.
    7. Click the Apply button at the bottom of the screen.


    DMZ

    1. Open a web browser and type http://192.168.1.1 .
    2. Enter admin for both the Username and Password.
    3. Click the Login button found in the lower right corner of the screen.
    4. Expand the Advanced menu on the left.
    5. Expand NAT from the resulting submenu.
    6. Select DMZ from the resulting menu.
    7. Enter the IP Address of your Xbox console in the DMZ Host IP Address.
    8. Click the Save/Apply button.


    Disable DMZ

    1. Open a web browser and type http://192.168.1.1 .
    2. Enter admin for both the Username and Password.
    3. Click the Login button found in the lower right corner of the screen.
    4. Expand the Advanced menu on the left.
    5. Expand NAT from the resulting submenu.
    6. Select DMZ from the resulting menu.
    7. Clear the IP Address from the DMZ Host IP Address field.
    8. Click the Save/Apply button.


    Port Forwarding

    1. Open a web browser and type http://192.168.1.1 .
    2. Enter admin for both the Username and Password.
    3. Click the Login button found in the lower right corner of the screen.
    4. Expand the Advanced menu on the left.
    5. Expand NAT from the resulting submenu.
    6. Select Virtual Server from the resulting menu.
    7. Click the Add button.
    8. Select Custom.
    9. Enter the IP Address of your Xbox console in the Server IP Address field.
    10. For all 4 port fields enter 3074.
    11. Set the protocol to both if available, if not create two rules one with UDP selected and another with TCP.
    12. Click the Save/Apply button.


    Disable Port Forwarding

    1. Open a web browser and type http://192.168.1.1 .
    2. Enter admin for both the Username and Password.
    3. Click the Login button found in the lower right corner of the screen.
    4. Expand the Advanced menu on the left.
    5. Expand NAT from the resulting submenu.
    6. Select Virtual Server from the resulting menu.
    7. Select the Remove box to the right of any entries regarding port 3074.
    8. Click the Remove button.


    Firewall

    *The firewall does not have any adjustable options.*



    Restoring Factory Defaults

    Through Firmware

    1. Open a web browser and type http://192.168.1.1 .
    2. Enter admin for both the Username and Password.
    3. Click the Login button found in the lower right corner of the screen.
    4. Select Management from the menu on the left.
    5. Select Settings from the submenu.
    6. Select Restore Default from the resulting menu.
    7. Click the Restore Default Settings button.
    8. Click Ok on the pop up window.


    Through Hardware

    1. Locate the reset button on the back of the device.
    2. Press and hold the reset button for aprox. 5 seconds.
    3. Release the button and wait for the device to restart.


    How to Find Firmware Version

    1. Open a web browser and type http://192.168.1.1 .
    2. Enter admin for both the Username and Password.
    3. Click the Login button found in the lower right corner of the screen.
    4. Select Device Info.
    5. Select Summary.
    6. The Firmware version is found to the right of Software Version.


    Firmware Update

    1. Locate the updated firmware file either from
      http://www.zhone.com/support/       or from your internet service provider.
    2. Connect a LAN cable from your pc to the gateway.
    3. Open a web browser and type http://192.168.1.1 .
    4. Enter admin for both the Username and Password.
    5. Click the Login button found in the lower right corner of the screen.
    6. Select Management from the menu on the left.
    7. Select Update Software from the resulting submenu.
    8. Click the Browse button.
    9. Select the file that you obtained from your internet service provider.
    10. Click the Upload Software button.


    Bridging Guide

    1. Open a web browser and type http://192.168.1.1 .
    2. Enter admin for both the Username and Password.
    3. Click the Login button found in the lower right corner of the screen.
    4. Select Advanced Setup from the menu at the left.
    5. Select WAN from the menu on the left.
    6. Click the Edit button next to your active connection.
    7. Click Next.
    8. Select Bridging.
    9. Click Next.
    10. Click Next.
    11. Select Tools from the menu across the top.
    12. Select System Commands from the menu at the left.
    13. Click the Save All button to make the changes permanent.




    Multiple Console Support

    We have confirmed that this network device is unable to support more than one console with an Open NAT.



    Known Issues

    There are no known issues at this time.

    Device Manual

    Click
    here     for the manual.

    :)
     
    XBR Poseidon, Jul 6, 2014
    #1
  2. XBR Poseidon
    XBR Poseidon Guest
    Zhone Zhone 6212: Firewall

    Zhone (Modems/Gateways) Zhone 6212: Firewall
    Device Name Zhone 6212

    Login Information:

    Default Gateway – 192.168.1.1

    Username – admin

    Password – admin



    Firewall

    *The firewall does not have any adjustable options.*
     
    XBR Poseidon, Jul 6, 2014
    #2
  3. XBR Poseidon
    XBR Poseidon Guest
    Zhone Zhone 6212: MAC Filtering

    Zhone (Modems/Gateways) Zhone 6212: MAC Filtering
    Device Name Zhone 6212

    Login Information:

    Default Gateway – 192.168.1.1

    Username – admin

    Password – admin



    MAC Filtering

    This device is not capable of wireless.
     
    XBR Poseidon, Jul 6, 2014
    #3
    Error:Failed to connect to localhost port 9200: Connection refused
Thema:

Zhone Zhone 6212: Overview