Zhone: Restoring Factory Defaults

Zhone (Modems/Gateways): Restoring Factory Defaults
Device Name Zhone 6211-A2-ZB24-10

Login Information:

Default Gateway – 192.168.1.1

Username – admin

Password – admin



Restoring Factory Defaults

Through Firmware

1. Open a web browser and type http://192.168.1.1 .
   
2. Enter admin for both the Username and Password.
3. Click the Login button found in the lower right corner of the screen.
4. Select Management from the menu on the left.
5. Select Settings from the submenu.
6. Select Restore Default from the resulting menu.
7. Click the Restore Default Settings button.
8. Click Ok on the pop up window.

Through Hardware

1. Locate the reset button on the back of the device.
2. Press and hold the reset button for aprox. 5 seconds.
3. Release the button and wait for the device to restart.

:)

 

Zhone: Restore Factory Defaults

Zhone (Modems/Gateways): Restore Factory Defaults
Zhone 1511

Login Information

• Gateway – http://192.168.1.1
• Username – admin
• Password – admin

Restore Factory Defaults

Through firmware

1. Plug the computer into a LAN port via an ethernet cable.
2. Open a web browser.
3. Enter http://192.168.1.1 into the address bar.
   
4. When prompted enter admin for both the username and password.
5. From the menu on the left, select Management.
6. Select Settings from the submenu on the left.
7. Select Restore Defaults from the next submenu.
8. Select the Restore Default Settings button.

Through Hardware

1. Locate the reset button on the back of the device.
2. Using a toothpick or ballpoint pen press and hold the reset button for 30 seconds.
   
3. Wait for the device to restart.

 

Zhone: Restore Factory Defaults

Zhone (Modems/Gateways): Restore Factory Defaults
Zhone 6218

Login Information



Gateway – 192.168.1.1

Username – admin

Password – admin



Restore Factory Defaults







Through firmware

1. Plug the computer into a LAN port via an ethernet cable.
2. Open a web browser.
3. Enter http://192.168.1.1 into the address bar.
   
4. When prompted enter admin for both the username and password.
5. From the menu on the left, select Management.
6. Select Settings from the submenu on the left.
7. Select Restore Defaults from the next submenu.
8. Select the Restore Default Settings button.

Through Hardware

1. Locate the reset button on the back of the device.
2. Using a toothpick or ballpoint pen press and hold the reset button for 30 seconds.
   
3. Wait for the device to restart.