Zhone: DMZ

Zhone (Modems/Gateways): DMZ
Zhone 6381-A4

Login Information:

Default Gateway – 192.168.1.1

Username – Admin

Password – Admin



DMZ

1. Open a web browser and type http://192.168.1.1 .
   
2. Enter Admin for both the Username and Password.
3. Click the Login button found in the lower right corner of the screen.
4. Select Advanced from the menu across the top.
5. Select Port Forwarding from the menu on the left.
6. Select the IP Address of your Xbox console from the LAN IP drop down.
7. Click the DMZ link.
8. Click the Save/Apply button.
9. Select Tools from the tabs across the top.
10. Select System Commands from the menu on the left.
11. Click the Save All button.

Disable DMZ

1. Open a web browser and type http://192.168.1.1 .
   
2. Enter Admin for both the Username and Password.
3. Click the Login button found in the lower right corner of the screen.
4. Select Advanced from the menu across the top.
5. Select Port Forwarding from the menu on the left.
6. Select the IP Address of your Xbox console from the LAN IP drop down.
7. Click the DMZ link.
8. Remove the Xbox console from the LAN IP drop down.
9. Click the Save/Apply button.
10. Select Tools from the tabs across the top.
11. Select System Commands from the menu on the left.
12. Click the Save All button.

:)

 

Zhone: DMZ

Zhone (Modems/Gateways): DMZ
Zhone 1511

Login Information

• Gateway – http://192.168.1.1
• Username – admin
• Password – admin

DMZ

1. Open a web browser.
2. Enter http://192.168.1.1 into the address bar.
   
3. When prompted enter admin for both the username and password.
4. Select Advanced Setup from the menu on the left.
5. Select NAT from the sub-menu.
6. Select DMZ Host from the next sub-menu.
7. Enter the IP Address of the console in the DMZ Host IP Address field.
8. Click the Save/Apply button.

Disable DMZ

Page under construction.

 

Zhone: DMZ

Zhone (Modems/Gateways): DMZ
Zhone 6218

Login Information



Gateway – 192.168.1.1

Username – admin

Password – admin



DMZ

1. Open a web browser.
2. Enter http://192.168.1.1 into the address bar.
   
3. When prompted enter admin for both the username and password.
4. Select Advanced Setup from the menu on the left.
5. Select NAT from the sub-menu.
6. Select DMZ Host from the next sub-menu.
7. Enter the IP Address of the console in the DMZ Host IP Address field.
8. Click the Save/Apply button.

Disable DMZ

1. Open a web browser.
2. Enter http://192.168.1.1 into the address bar.
   
3. When prompted enter admin for both the username and password.
4. Select Advanced Setup from the menu on the left.
5. Select NAT from the sub-menu.
6. Select DMZ Host from the next sub-menu.
7. Clear the DMZ Host Ip Address field.
8. Click the Save/Apply button.