Zhone: DHCP Reservation

Zhone (Modems/Gateways): DHCP Reservation
Zhone 6381-A4

Login Information:

Default Gateway – 192.168.1.1

Username – Admin

Password – Admin



DHCP Reservation

1. Open a web browser and type http://192.168.1.1 .
   
2. Enter Admin for both the Username and Password.
3. Click the Login button found in the lower right corner of the screen.
4. Select Advanced from the options across the top.
5. Select LAN Clients from the menu at the left.
6. Enter the desired IP Address in the Enter IP Address field.
7. Enter a host name if you desire.
8. Enter the MAC Address of your Xbox Console.
9. Click the Apply button at the bottom of the page.
10. Select Tools from the menu across the top.
11. Select System Commands from the menu at the left.
12. Click the Save All button to make the changes permanent.

:)

 

Zhone: DHCP Reservation

Zhone (Modems/Gateways): DHCP Reservation
Device Name Zhone 6211-A2-ZB24-10

Login Information:

Default Gateway – 192.168.1.1

Username – admin

Password – admin



DHCP Reservation

1. Open a web browser and type http://192.168.1.1 .
   
2. Enter admin for both the Username and Password.
3. Click the Login button found in the lower right corner of the screen.
4. Select Advanced from the options across the top.
5. Select LAN Clients from the menu at the left.
6. Enter the desired IP Address in the Enter IP Address field.
7. Enter a host name if you desire.
8. Enter the MAC Address of your Xbox Console.
9. Click the Apply button at the bottom of the page.
10. Select Tools from the menu across the top.
11. Select System Commands from the menu at the left.
12. Click the Save All button to make the changes permanent.

 

Zhone: DHCP Reservation

Zhone (Modems/Gateways): DHCP Reservation
Zhone 6218

Login Information



Gateway – 192.168.1.1

Username – admin

Password – admin



DHCP Reservation

1. Open a web browser.
2. Enter http://192.168.1.1 into the address bar.
   
3. When prompted enter admin for both the username and password.
4. Select Advanced Setup from the menu on the left.
5. Select LAN from the sub-menu.
6. Click the Add Entries button below the MAC Address IP Address table.
7. In the following screen enter the console’s MAC Address and the desired IP Address.
   
8. Click the Apply/Save button.