Your network is behind a port-symmetric NAT

I get the message "Your network is behind a port-symmetric NAT" along side with a Strict NAT. I am using a wired connection, plugged into my Netgear wgr614v9 and I've tried everything. Disabling and enabling UpnP, opening my ports, turning the NAT from secured
to open, restarted multiple times waiting the 30 seconds each time, and I still have a strict NAT. please help.

:)

 

XBox One - Strict NAT & High Packet Loss

Detailed NAT info says: Your network is behind a port-preserving port-symmetric NAT.

 

**** tg1672 problems with advanced warfare

Strict - Your network is behind a port-preserving port-symmetric NAT.

 

oh and also the "Status code" is 0x104004000000000

 

Oh, by the way. My NAT is fine on the 360, it's open on Cod: Ghosts and all the other games and I can host parties and stuff, but on the One it is on strict.

 

More information is needed. Please respond to the following questions for further assistance:

What Country/State/Province do you live in?

Modem brand & model number:

Router brand & model number:

Wired or wireless:

Things you have tried:

Is UPnP Enabled? Yes/no/Unknown

Do you have a NAT error? If so, what is your NAT type?

Any Error Codes you encounter:

Who is your ISP?(Internet Service Provider):

Please log on to your router's web interface and state whether the WAN/Internet IP (not LAN IP) listed there is a private IP (i.e. 10.x.x.x, 172.16.x.x - 172.31.x.x, or 192.168.x.x--please don't post your IP, just note whether it matches those, which
means it is a private IP):

Additionally, it would help to know how port forwarding is setup for your 360--UPnP, manual, DMZ, etc? Note that UPnP is the only way to get open NAT on both the 360 and One at the same time.

 

What Country/State/Province do you live in? USA, Virginia

Modem brand & model number: NetGear wgr614v9

Router brand & model number: CenturyLink 660 Series

Wired or wireless: Wired

Things you have tried: Everything

Is UPnP Enabled? Yes

Do you have a NAT error? If so, what is your NAT type? Strict NAT Your network is behind a port-symmetric NAT

Any Error Codes you encounter: No

Who is your ISP?(Internet Service Provider): Century Link

Please log on to your router's web interface and state whether the WAN/Internet IP (not LAN IP) listed there is a private IP (i.e. 10.x.x.x, 172.16.x.x - 172.31.x.x, or 192.168.x.x--please don't post your IP, just note whether it matches those, which means
it is a private IP): I don't know

 

I got the modem and router names backwards. replace router with modem and modem with router

 

Your modem is really a DSL gateway (modem+router). This puts your Xbox behind 2 NAT routers (the DSL gateway and your Netgear) and creates a problematic double NAT situation that keeps you from getting open NAT. You need to put the gateway into bridge
mode, configure your Netgear router to perform the necessary DSL login (probably via either PPPoE or DHCP), and either use UPnP (which doesn't work correctly on many home routers) or manually forward the necessary ports on your Netgear to the Xbox. General
instructions for doing that are here:

www.dslreports.com/.../r23750452-Embarq-Bridging-Embarq-660-Modem-With-Netgear-Router

Search "CenturyLink 660 bridge mode" for other instructions.

 

I'm having the same problems, I've done everything under the sun to figure it out. watch every video and read every forum. I'm not overly tech savvy so if you can dumb it down for me that would be nice lol. I believe this is all the info your looking for.
If you have any ideas on how to solve this problem, they will be greatly appreciated!

What Country/State/Province do you live in? Ontario, Canada

Modem brand & model number: Microsemi, Powerdsine 3001

Router brand & model number: Asus, RT-N56U

Wired or wireless:Wired

Things you have triedMZ, Port forwarding, Upnp...

Is UPnP Enabled? Yes/no/Unknown Yes

Do you have a NAT error? If so, what is your NAT type? Strict NAT, port-symmetric NAT

Any Error Codes you encounter: 0x10040000000000

Who is your ISP?(Internet Service Provider): Xplorenet

Please log on to your router's web interface and state whether the WAN/Internet IP (not LAN IP) listed there is a private IP (i.e. 10.x.x.x, 172.16.x.x - 172.31.x.x, or 192.168.x.x--please don't post your IP, just note whether it matches those, which means
it is a private IP): It says automatic IP but its the 191.168.x.x IP