Xbox Wireless Display work on mac?

Hey,

I am looking for clarification on how exactly the xbox wireless display app works. Can it connect to my pc/mac and play my steam library through the console? Or does it just mirror it. From the dicussion ive seen it looks like it just mirrors the pc and
doesnt actually use the console itself to play the games. Im trying to figure out if I can run my steam library on the xbox series s.

Thanks in advance,

Eben

Its to send q video signal of your xbox display to a computer without using cable

Of course this can cause latency

You could add your Xbox's MAC address to the allowed list in your router's configuration page and it will allow it online.

To locate your Xbox's MAC address go to Settings > Network > Advanced Settings. The MAC Addresses for the wired and wireless adapters will be displayed. Write them down as they are long.

Is your Wireless secured with a password??? If so check your password. Also check your router to see if you are using MAC filtering, if so it will not work until you put the Wireless MAC address into the filter. A big difference between the XBox One and
the XBox 360 is the 360 only using one MAC address for both Wireless and Wired, yet the XBox One use 2, one for each.

Unfortunately this would only work through wireless display. Here is a
link to a FULL explanation and official tweets

get the mac address from your xbox & then turn it off. set that as the mac address on the wireless for your computer & connect, then turn off your wireless and remove the mac (in that order). turn on your xbox, it *should* connect, turn on your computer
it will say it needs to reconnect.

wipe hands sip drink. repeat that last step as needed.

this doesnt work everywhere and you will need to look up the informaiton on where to make those mac address changes on your computer.