Xbox Stereo One Headset now making Beeping noises

Hi mr beep

I tested the headset on my phone and the mic works. The only possibility what I can think of is that it is a software flaw. None of my other stereo headsets work now on the Xbox

yeah if you get the xbox one stereo headset adaptor that plugs into your controller then it comes with a cable which will reduce the 3.5mm jack on the Tritton headset to 2.5mm

Once you have the stereo headset adaptor connected up make sure you change the game/chat mix to 100% chat mix so that you only get chat coming through the stereo headset adaptor - if you forget to do this you will be getting the Dolby digital game sound
coming from the Xbox Ones optical output and also the stereo version of the game sound coming through the stereo headset adaptor in your controller - and you don't want that

To change the mix just press and hold the chat button on the stereo headset adaptor until you hear it beep which lets you know you maxed that channel out to 100% chat/0% game

and as above make sure to switch your optical output to bitstream and dolby digital to get the good stuff

Just keep pressing the button on the adapter that has a person on it until its at max (not sure if it makes a confirmation noise or not when its at max)

Make sure the volume is all the way up on the adapter as well, this will make a beep when its at its highest

Now on your astro headset hold down on the chat audio side of the headset until you hear the 2 beep confirmation that its at highest volume. You now have both headset and controller at max chat volume. Use your astro headset to adjust game volume now, dont
toggle with the adapter controls anymore as it could mess with the stuff again

Hope it helped

6) Select Bitstream format and then select Dolby Digital.

Configuring the Xbox One Stereo Headset Adapter

By default, the Xbox One Stereo Headset Adapter will output both game audio and voice audio which will render the mixer on the A50 Wireless Headset unusable. Follow the below steps to set the Xbox One Stereo Headset Adapter to only output voice audio which
will correct this.

1) Set the mixer on the A50 Wireless Headset to full voice audio. To do this, hold down the voice button on the A50 Wireless Headset until you hear two beeps. Two beeps is an indication that you have fully mixed towards either game or voice depending on
what button you was holding.

2) On the Xbox One Stereo Headset Adapter, hold down the chat audio button until you hear a beep. At this point, you should only be able to hear voice audio from your Xbox One.

3) On the Xbox One Stereo Headset Adapter, hold down the plus button until the voice audio no longer increases.

That's all that's to it! You will now be able to use the microphone from your A50 Wireless Headset on your Xbox One and the mixer will work as intended allowing you to mix between game audio and voice audio with ease. Should you have any further questions
regarding the A50 Wireless Headset and Xbox One, please feel free to post them on this thread and we'll respond as quickly as possible with an answer for you.

This seems to be the same for the Xo7 as well. My co worker said there is not even a volume control turn dial at all.

IMO this is not ok.

That copy paste is saying turn your game audio off to be able to adjust your voice volume.

Well the console is called the Xbox ONE; going backward this console generation. I already have Astro A50 partly because the stereo adapter had a bug causing static noise on everyone headset (probably fix by now).