Xbox series x won’t turn on via the power button

Hello ÚÑKÑØẄÑ ©, My name is David. I am an independent advisor, happy to help you today.

I'm sorry you're experiencing this issue with your Xbox Series X controller. Here are some possible solutions you could try:

Restart your Xbox console: Press and hold the power button on your Xbox console until it turns off. Next, disconnect the Xbox Series X from its power source. Turn off the Xbox controller and remove its batteries. Finally, connect and turn on your Xbox Series X.

Restart the controller: Press and hold the power button on the controller for several seconds until it turns off. Then turn it back on.

Pair the controller with the console again: Press and hold the sync button on the console until the power button flashes. Then, press and hold the sync button on the controller until the lights on the controller flash.

Best regards.

Hi TexasMaster9351! My name is Ricardo an independent advisor ready to help you with this situation!

HDMI-CEC is supported only on Xbox One X, Xbox Series S, and Xbox Series X. You must also enable HDMI-CEC on your TV.

Xbox Series X|S consoles can use an HDMI feature called Consumer Electronics Control (CEC) to send commands to and from CEC-enabled devices (such as TVs and AVRs) that are connected to the console.

This feature can be turned on and off via the TV & A/V power options settings screen. Press the Xbox button  to open the guide, then go to Profile & system > Settings > General > Sleep mode & startup > TV & A/V power options.

My name is Fernando I'm an independent consultant, I'm happy to help.

Try this procedure, hope it helps: Plug the power cord back into your Xbox Series X|S; Turn on the control; Press and hold the sync button on your Xbox Series X|S; Press the sync button on the controller until the time it starts flashing rapidly, then release it.

Hope I helped and see you soon

Thank you for contact us! I'm Anderson, an Independent Consultant and a Microsoft user like you.

good evening

I'm sorry to hear that you're having trouble viewing your Xbox Series X on your TV. Here are some things you can try to troubleshoot the issue:

Check the HDMI connection: Make sure the HDMI cable is properly connected to the Xbox Series X and the TV. Check the HDMI cable or HDMI ports on your devices for visible damage.

Check TV input: Make sure your TV is set to the correct input for the HDMI port your Xbox Series X is connected to.

Restart Xbox Series X: Try restarting your Xbox Series X by holding down the power button for 10 seconds until it turns off, then unplug it and wait a few minutes before plugging it back in and turning it on.

Reset display settings:

If there is a disc in the console, eject it.

On your console, press and hold the Xbox  button for 10 seconds to turn it off.

Press and hold the Xbox  button and the Eject button until you hear a beep to turn on the console. You will hear a beep immediately and a second beep 10 seconds later. The power light will flash before the second beep. Don't let go until you hear the second beep or see the console boot into low-resolution mode (the Xbox boot screen will appear slightly pixelated).

Note If you have an Xbox Series S or Xbox One S All-Digital Edition, you will need to press and hold both the Xbox  button and the Pair button as your console does not have an Eject button.

Check for updates: Make sure you have the latest update for your Xbox Series X installed. Updates can sometimes fix display issues.

Hope these suggestions help!

The rapid flashing of the power button on the Xbox Series X indicates that there may be an issue with the console's power supply or the internal hardware.