Xbox Series S turning on, but the TV show no signal and not being able to turn the xbox off...

I have the Xbox series S/X. When I turn on my xbox it turns on as usual without any problems but when I switch to HDMI 1 or 2 on my TV it says "no signal" or "make sure connected device is turned on" when it is. And no nothing else is connected to the xbox.

Guess you have set up the xbox to turn on the tv and receiver. So it tries to do that when it is turned on (Xbox cannot sense that it is already on).

Your tv model responds to turn on/off with the same infrared signal. So when it is on, it will turn off and vice versa with the same command. That's not a fault/problem from the xbox but from the tv manufacturer.

So two options:

- always turn on the tv by turning on the xbox and turn the tv off by turning the xbox off

- or do not let the xbox turn on your tv and do that manually

Hi Ianc3,

It seems the IR blaster in the Xbox that sends the signal to your TV is either being blocked or its not being detected by the TV. We may need to toggle your device power options, fully reboot your Xbox, and then set up the power settings again.

First go to Settings>Power & Startup>Power Mode and Startup>TV & A/V power options. In the row that says TV you will see the two options to turn on your TV when the Xbox turns on and the same when it turns off. If both settings are set to ON, switch them
to OFF, then hold down the power button on your console until the console turns off. Unplug the power cord for 5 minutes, turn it on, and go back into your settings and change the power options for your TV to ON. Then go ahead and turn off your Xbox to see
if it turns off your TV as well. Then turn on the Xbox to see if the signal gets received by your TV to turn it on.

If that doesn't help then you may need to set up your TV again from the TV & OneGuide section.

Let us know the results!

Have you set the Xbox One to control the power toggle of your TV? If so, it will send a signal to your TV to toggle the power state of the TV. Basically, if your TV is On before turning on your Xbox One then the signal sent to the TV will turn it off. If
it is Off before turning on your Xbox One, then it will turn On the TV.

Check the settings to see if this is the case. It should be under Settings -> Power & startup -> Power mode & startup -> TV & A/V power options

Same black screen. Power display shows on, my Tv HDMI input shows receiving signal but black screen on xbox. Home button shows it’s there and option to turn console off or controller off but that is all I can do. Smh !