Xbox Power brick main cable replacement

Thanks for the reply!

A lot of what I have found online talks about replacing the power brick for the Xbox One S/X, but the Series X doesn't have a power brick, it's just a power cable. I would assume that I would just replace that then?

I've replaced my power supply for my original Xbox One two times... similar issues to what you're describing. It took a full unplug.. I even unplugged the cable from the wall and from the brick. The brick was always very warm when I did this.. I believe
the brick itself was overheating, which is why I replaced it.

[quote user="Mc Knives"]I have a JPN xbox and live in Ireland/ Co Dublin. I'm wondering do I need a power converter or will my euro power brick work with that?[/quote]If you have a European power brick, that will work. The accepted AC input on the power
brick varies, but the DC output to the consoles is the same.

Or can I use the JPN power supply?

Heh, no, if you plug a JPN power brick into Irish mains power, you'll at best blow the fuse in the brick. At worst, you'll blow up the power brick.

My
friend on live has a JPN 360 and uses his cables from his uk 360.

The AV port, HDMI port, Ethernet, USB, Kinect, and optical ports are not region-specific. Doesn't matter what region those cables are from. It's the power brick and the cable from the
brick to the wall that are region-specific.

Hi augustoventura.

Actually most of the power bricks for the Xbox One (VCR model) will run in most countries. Check the label on the back, and if it says: Input: AC 100-240V, Then you just have to change the power lead cable.

Otherwise, yes. You can just replace the power brick for a EU version.

Hi. What model do you have?

The original Xbox One with external power supply will need a replacement power brick.

The Xbox One S and X models with internal power supplies are universal and will work anywhere,you just need a cable that fits the correct plug.