Xbox one x No signal when turned on, what do i do?

Hello @dzonis32, I hope that you are doing well!

Thank you for reaching out to us here on the forums regarding this situation.

With issues like these, normally changing the HDMI cables will fix the issue. However, since you've already done that, I would suggest connecting your console to another TV.

If the issue persists, please check no signal troubleshooting guide for more assistance.

I hope this helps you out! wish you a lovely day!

Kind Regards

Stay safe, and happy gaming!

My apologies, I forgot to add this:

* If you have an all-digital console like the Xbox One S all-digital edition or the Xbox Series S, you can do the display reset and bring up the startup troubleshooter using holding the BIND button only.

Hi, Jose! Thank you for reaching out.
I'm AJ, an Independent Advisor for the Xbox Community.
I'm sorry you are experiencing issues with your console.

- Do you, by any chance, have a different HDMI cable you could try with your console?

- Besides your TV, do you have any other external devices plugged into your console?

- Alternatively, would you mind giving these a try?

--------

Power cycle your devices:

• Press and hold your console's power button until it shuts down.
• Unplug all external devices from the console.
• Unplug your console's power cord for 5 minutes.
• Turn your TV off and unplug it for 5 minutes.
• Plug everything back together
• Turn your console on and check if the issues persist.

--------

Display reset:

• If there's a disc in the console, eject it.
• On the console, press and hold the Xbox button for 10 seconds to turn off the console.
• Press and hold the Xbox button and the Eject button until you hear a beep to turn on the console.
You’ll hear one beep right away and a second beep 10 seconds later. The power light will flash on before the second beep. DO NOT LET GO until the second beep occurs.

--------

Xbox Startup Troubleshooter:

• Power off your console, and then unplug the power cord to ensure that the console is completely powered off.
• Wait 30 seconds, then plug the power cord back in.
• Press and hold the BIND button and the EJECT button, and then press the Xbox button on the console.
• Continue holding the BIND and EJECT buttons for 10-15 seconds.
• Listen for two “power-up” tones a couple of seconds apart. You can release the BIND and EJECT buttons after the second power-up tone.
• The console should power up and take you directly to the Xbox Startup Troubleshooter.

--------

Please let me know if either of these makes a difference, I'll be looking forward to your reply.
Best regards.

Hey Casey!

Nice to meet you! I'm Darhyl, an Independent Advisor. I'm sorry you are experiencing this. I am here to help.

Please try to follow these troubleshooting steps:

Confirm that both your TV and console are turned on

Check that your TV is set to the correct input signal (HDMI)

Check that the HDMI cable connections to your console and to your TV are secure

Confirm that the HDMI cable is connected to the "out to TV" port on the console

Plug the HDMI cable into a different HDMI port on your TV

Use a different HDMI cable to connect your console to your TV

Connect your console to a different TV

Power cycle your console by pressing and holding the Power button for 10 seconds to turn off the console, and then turning it on again

Reference link: https://support.xbox.com/en-US/help/hardware-ne...

If its like the Xbox One X then yes, it can send out infrared signals.

At some point you must have set up your console to turn your TV on, or it may have been switch on by default.

Go into settings, TV section I think, or it could be under the power section, cant remember. Either way there is an option in there somewhere that asks you what to do when the Xbox is switched on/off, one of the options is to turn the TV on.