Xbox One X kein Signal [Mod Translation - Xbox One X no signal]

Thank you for taking the time to post this on the Xbox Forums. We understand that you are currently experiencing difficulties with your console displaying images on your TV.

There is likely some sort of resolution discrepancy that is causing the "No signal" message to appear on your TV.

For this, I would recommend that you
reset your display settings on your console, and then adjust to a lower resolution on to see if this prevents you from reproducing the same scenario.

This can be done by following these simple steps:

1. there's a disc in the Xbox One console, eject it.
2. On the console, press and hold the Xbox button for 10 seconds to turn off the console.
3. Press and hold the Xbox button and the Eject button until you hear a beep to turn on the console. You’ll hear one beep right away and a second beep 10 seconds later. The power light will flash on before the second beep. Don’t
   let go until the second beep occurs.
   
4. In either case, this will boot your console in low resolution mode (640 × 480). To reset this setting, press the Xbox button to open the guide. Go to System > Settings > Display & sound > Video
   output, and then select the resolution you want from the Display dropdown.

Give this a try and let us know if this works for you!

I tryed everything that was mentioned but the issue was not resolved

Hello!

Thank you for posting on the Xbox forums. We will be locking this thread due to it being revived by a new post. If there are any questions, discussions or issues that anyone would like to bring to our attention, please create a new thread. We will be more
than happy to answer any questions or provide solutions for any issues. Thank you again and happy gaming!

I tryed everything that was mentioned but the issue was not resolved

Please don't resurrect old posts.

To help you better with your specific problem, try creating your own thread.

If the methods described above didn't help, you need to send in your console for repairs through
https://devicesupport.microsoft.com

Hi Badweather2010,

Thanks for reaching out to us today. I'm sorry to hear about the current issue with not getting any signal on through the Xbox One X. I do see you state to have tried various steps on trying to resolve this. Even tried different cables, have you tried on
a different tv/ monitor to see if you still don't receive any signal?

I do want to ask have you attempted to perform the offline system update or tried to reset the console by bringing up the Xbox Startup Troubleshooter? If not follow these steps:

1. Power off your console, and then unplug the power cord to ensure that the console is completely powered off.
   
2. Wait 30 seconds, and then plug the power cord back in.
3. Press and hold the BIND button (located below the Xbox button on the console) and the
   EJECT button (located on the front of the console), and then press the
   Xbox button on the console.
4. Continue holding the BIND and EJECT buttons for 10-15 seconds.
   
5. Listen for two “power-up” tones a couple of seconds apart. You can release the
   BIND and EJECT buttons after the second power-up tone.
6. The console should power up and take you directly to the Xbox Startup Troubleshooter.

Here you can select to perform the Offline system update which would require you to

download the offline system update. As well as you can select Reset this Xbox. When prompted, select
Keep games and apps. This option will reset the OS and delete all potentially corrupted data without deleting your games or apps.

Note: Before resetting your console make sure of the following:

• There is a stable network connection.
  
• The information for all profiles is known (email and passwords)
  
  
  

Once the setup is complete it will ask if we want to keep settings or manual setup let's do
manual setup.

Give it a shot and let us know of any changes!