Xbox One X DVR not working AGAIN!

I had the issue happen again. This time, I think I may have found a "workaround" to get it working again, without cold booting either the DVR or the XBox One.

To reiterate: the issue was that the signal [video and audio] from the DVR was blinking in and out.

The Workaround:

I performed the following sequence of actions, with power settings set to Toggle DVR on/off (since that's all my DVR supports):

- Start with DVR on and XBox One on, exhibiting the problem

- Turn XBox One off normally (which toggles the DVR off)

- Turn the DVR on (even though you cannot see/hear the content)

- Turn XBox One on (which toggles the DVR off)

- Turn DVR on

Once things handshake over HDMI, the problem is gone! (until it comes back, possibly by turning the XBox off normally, in which case I have to redo this workaround)

Any progress in getting this problem fixed?

One Xbox One S and X. Max record time in DVR is 5 minutes with the resolution at 720p. On Xbox One. The DVR max is 15 minutes at 720p. All these settings are found under the Broadcasting and Capture section in Preferences in the settings. Although. That
is odd that the S and X have a shorter time.

^ Yep.

Xbox One DVR will capture game footage at 720p 30fps

64 x 64 gamerpics also being upgraded to full 1080p



www.oxm.co.uk/.../xbox-one-dvr-will-capture-game-footage-at-720p-30fps

Well, the one thing a tech support agent had me do(when I was having no picture at all issue, and shortly after check hdmi connections, having the 30 seconds of tv play, the freezes, then tv play, over, and over) was this: Turn off xbox on. Turn off cablebox/receiver/dvr.
Turn off TV. Unlug xbox one. Unplug cablebox/receiver/dvr. Then, plug in cablebox/receiver/dvr. Turn it on, wait for it to completely power on. Then plug in xbox one, turn on xbox one. Give it a few seconds to power up. Then turn on the tv if necessary. This
process of powercylcing every device in the television chain from top to bottom fixed my issues with my day one during my first day of setup. About a month later, tv stopped working again. I did this process again(slightly modified, cause i did unplug my cablebox/receiver/dvr)
and it fixed my issue again and has been working fine since again. I'll always rely on the powercycle everything technique when things act up with this system arrangement. Oh, and i'm a uverse subscriber with a Cisco IPN4320 dvr/cablebox combo. Hope this info
helps!

Hey there GreenDragon080.

It sounds like your son's Xbox One hasn't received the update if they see the option to press Y or X for Game DVR. With the new update, press the Xbox button once and then press the menu button to bring up the Game DVR app. All Game DVR abilities are now done
through there. Let us know if you have any other questions with that.