Xbox One X controller firmware update

In this case, it wouldn't be a bad idea to update your controller's firmware. You can do this on your Series X or your Windows 10 PC. To do it on the Series X, connect it using the USB cable and then go to Settings > Devices & connections > Accessories, and then select the controller you want to update. On the Xbox Wireless Controller screen, select “…” to check the firmware version for your controller. Then, select the Firmware version square, and then press Next to start the update process.

To do it on Windows 10, just download the Xbox Accessories app from the Microsoft Store. If you already have it installed, just run it. After opening the app, the procedure to update is the same one as on the Series X, press the "..." button and follow those steps.

Check if your controller works correctly after doing this.

check this link in how to update you're controller firmware https://www.howtogeek.com/267520/how-to-update-your-xbox-one-controllers-firmware-without-an-xbox-one/

i hope this help you

There was a firmware update recently. Update controller firmware from Settings.

This can be caused by a variety of factors, including a problem with the controller's connection, an issue with the Xbox One X's wireless receiver, or a problem with the controller's firmware.

Here are a few things you can try to fix the problem:

1. Move your Xbox One X closer to your controller to ensure a stronger connection.
   
2. Try resetting your controller by holding down the Xbox button and the sync button simultaneously for a few seconds.
   
3. Try to update the controller's firmware by connecting it to your Xbox One X via USB cable, and check for any available updates.
   
4. Try to reset your Xbox One X to its factory settings.
   
5. Try to use a different USB cable and USB port to charge your controller, it may be an issue with the cable.
   
6. If none of these solutions work, it may be necessary to contact Microsoft support for further assistance or bring it to a professional for repair.
   

It's important to note that disconnecting controller issue may be caused by a hardware malfunction, which would require professional repair or replacement of the device.

"I have updated the firmware on both controllers. Current firmware version is 2.3.2381.0."

I would check your firmware version because the version I have is a lot higher than the one you have, 4.8.1923.0.. Update
XBox one controller with the uSB method.