Xbox One won't turn on. Power button chimes on then chimes off 10 seconds later

Hi Korde,

Thanks for coming to the forums. We recommend if you can try a different power supply. With it going back to orange while plugged in sounds like it the power supply. When the console is turned on it should turn white and stay white. You can also try

my console wont power on for more troubleshooting.

Thanks,

Brad

Tries changing the power supply but it still doesn't work. As I said when I plug in the power brick, it turns white then orange then white again then orange, then it goes orange. And this is in multiple different power bricks. Anymore suggestions? Please
help

I see, try the solution below, please.

1. Turn off Xbox One.

2. Unplug power.

3. Plug the power back to Xbox One 30 seconds later.

4. Press and hold Bind and Eject at the same time (don't release).

5. Press and release the Power button, and then you will hear the startup chime.

6. When you hear the second startup chime, you can release the bind and eject buttons.

7. Select Reset this Xbox on the screen.

8. Select Keep games and apps.

Try turning the Xbox One off at the plug and then on, then hold the eject and power buttons, you should hear a chime keep holding until you hear the second chime. Then you should see an image in 480p with reset image options. Go into settings and set the
image options back to how you want them. Hope this helps!

My name is Loren. I'm an Independent Advisor, and I'll be glad to help you today.

Try this:

- If there's a disc in the Xbox console, eject it.

- On the console, press and hold the Xbox button for five seconds to turn off the console.

- Press and hold the Xbox button and the Eject button until you hear a beep to turn on the console. You will hear one beep right away and a second beep 10 seconds later. The power light will flash on before the second beep. DO NOT LET GO until the second beep occurs.

If that doesn't work then please do this:

- Turn your Xbox off

- Press and hold both the bind button and the eject button on your Xbox.

NOTE: The bind button is the one you use to sync wireless controllers to your Xbox, and the eject button is the one you use to eject discs.

- With the bind and eject buttons still held down, press and release the power button. At this time, you will hear a startup chime.

- Continue holding the bind and eject buttons until you hear the startup chime a second time

- Release the bind and eject buttons.

- Select Reset this Xbox from the menu.

- Choose the option "Keep my games & apps"