Xbox one S power is on but nothing displaying on screen

Jumbofato · Sep 11, 2017

I'm having issues with my Xbox One S. When I turn on my console the screen doesn't display anything. All I see is a black screen, but the power button is on. I also tried to turn it on through my controller and all I get is blinking lights on the controller.
I've had this issue get progressively worst for the past few weeks and originally I could get the system working again after holding down the power button for 10 secs and then turning it back on, but recently that solution hasn't worked. I've also unplugged
it and plugged it back in to reset the PSU but that hasn't worked either. I've also held down the other two front buttons, no the power button, and I didn't hear the beeps so that didn't work either. Any other solutions that I could go through?

:)

DuckierTub26371 · Sep 11, 2017

Xbox screen static/ fuzz/ flicker

My xbox one is less than 2 months old and it's not displaying on the screen. I tried everything. Nothing fixes it. HELP!!? .

Karlos Fantano · Sep 11, 2017

Xbox One Grainy Picture

Hi,for some strange reason my xbox one is now displaying a faint grainy screen when i power on but is resolved by just restarting the console??has anyone else had this and can shed some light on it?Any help would be gratefull

Many thanks

Internet Expert · Sep 11, 2017

Give this support article a look, and try all of the troubleshooting steps outlined here: http://support.xbox.com/en-US/xbox-one/console/tv-or-monitor-screen-is-blank-while-connected

Internet Expert

Give this support article a look, and try all of the troubleshooting steps outlined here: http://support.xbox.com/en-US/xbox-one/console/tv-or-monitor-screen-is-blank-while-connected

enderdragon605

I had the same ms-resource:LABEL_MESSAGIGN_APP_DISPLAYNAME issue yesterday and today I now have a black screen on start-up (after the green xbox one screen displays). I tried power 10 seconds, power switched off, and the hold eject and power on for 5 seconds
but nothing.

Just a Volunteer

Also, if you have issues when factory resetting and are using a wired connection, disconnect the ethernet cable while it resets and then connect it after the reset is finished. It will connect to complete any updates required.

Just a Volunteer

I paste the same answer I made to a post you tacked on to.

There will never be a OSU1 file available to consoles enrolled in any Xbox Insider previews. The console has to be unenrolled from the preview before attempting an Offline System Update (OSU).

Normally, when the console is unenrolled the latest General Availability (GA) OS will be installed via the internet so a OSU is not required if your network connection is stable.

If you have unsuccessfully attempted to use a OSU1 file without unenrolling from Insiders, you need to factory reset the console.

The factory reset will install a base OS and if you have a stable network connection the console will download and install the latest OS available.

Reset console to factory defaults

System Update Solution .. Take note of the Insider section of this link

"Last Alpha Skip Ahead Update was early March 2023"

This is not true. There have been several ASA Insider updates since March 2023. There was one yesterday 20th April 2023. I suggest you visit the Xbox Insiders Reddit site regularly and /or check the Insider app everyday if you want to stay in the ASA Insider preview.

Greyson Letendre

It's an Xbox one S and no it doesn't display on my screen at all. It is plugged directly into the wall with no extensions or power cables. I did the boot-up method you wrote down more than once and still no luck.

Xbox one S power is on but nothing displaying on screen