Xbox One S don't display anything on my TV...

Hey, Mister Mascot.

I think you might have posted the wrong link there. The one you posted goes to this page about troubleshooting system update errors: -

http://support.xbox.com/xbox-one/console/system-updates-solution

This is the page with troubleshooting info for an issue with a blank screen: -

http://support.xbox.com/en-GB/xbox-one/console/tv-or-monitor-screen-is-blank-while-connected

Hey there AbundantAsp286,

Sorry to hear about the issue with the Xbox One console not starting up properly. We do have a guide for this though that can help with either Blank Screens or Error Codes. Give it a shot and see if it helps!

Troubleshoot Xbox One startup errors In step 1, select I AM EXPERIENCING A STARTUP ISSUE and then BLACK SCREEN in step 2. It's also helpful to just make sure that the HDMI Cable is plugged into the "HDMI Out" slot on the Xbox One console.
There is both an In and Out port, sometimes it can be a tad confusing.

_______________________________________________________



Xbox Forums Staff

Be sure to check out the Xbox Forum Guidelines for the Do's and Don'ts as well as the Xbox
Insider Program Forums for help with Xbox Insider Program troubleshooting. Achievement issues? Check our sticky

HERE for the best info.

I find my xbox one s working while set on dvi and 640p resolution. But no display on 1080p and hdmi.

Just to add i am using samsung smart 3d tv aand also tested my xbox one s on 2 other displays.. one pc monitor and one more smart tv

That's the issue right there, Prezdead! My TV auto detects the resolution being put out by the source and sets it accordingly. There is no way to set my TV's HDMI input to display a certain resolution regardless of what the source is putting out. My Android
box and Roku 4 put out a 4k signal when I enable the resolution they should output is 4k. Unfortunately, The XBOX One S doesn't seem to do that.

When I do the video test on the XBOX One. My TV doesn't even flicker. It just pops up that it failed everything, which is incorrect. If I change the resolution on the XBOX One S to 720p, then it flickers and my TV changes the display to 720p. If I change
the XBOX One S to display 1080p, then the TV flickers and changes the resolution to 1080p. If I try to change the XBOX One S to display UHD, it does nothing other than go instantly to the failed screen, which states none of the options are supported. Under
Advanced Video Settings though, I have 24Hz, 50Hz, and UHD 4k checked. the problem is, the XBOX One S is putting out the 4k signal because the test says the TV fails everything and the TV will not disaply in 4k until the TV receives a signal from the XBOX
One S to display in 4k.

Check this link for a possible solution: https://support.xbox.com/en-US/xbox-one/console/display-troubleshooter

I find my xbox one s working while set on dvi and 640p resolution. But no display on 1080p and hdmi.

Just to add i am using samsung smart 3d tv aand also tested my xbox one s on 2 other displays.. one pc monitor and one more smart tv