Xbox One S Display problems

Frizzly1010 · Mar 24, 2020

So I turned on my TV and Xbox today and the screen is in the top right corner.

I reset the Xbox with the power eject method but once I change the setting back to 4k it just moves back up into the top corner. The TV hasn't been changed but i did reset it and start everything over from scratch with no luck.

Any Ideas.

:)

Shandykidinkent

Frizzly, I haven’t had this occur to me on my S, although I found some information that may be of use to you. Please click the link

here. Please let me know if this does not help.

- Shandy

Cryptic Loner

Could be the tv/monitor you use, or the fact that you have manually changed it. Sometimes automatic adjustments works best for scaling and detecting the best displays.

I'll provide a website that should nail down your problem(s) https://www.thewindowsclub.com/xbox-one-screen-and-display-problems/

UN7RACE4BLE

hi DANMOBLEY1 there is currently a compatibility issue with HDR10 in the firmware of some models of LG TVs.. and LG are aware of the problem and have said an update will be issued in the new year, i would double check and see if you model TV is affected.

onyxishere

Sounds like the video card is dying on you. I would recommend against doing the "towel trick" as that covers up the vents and you risk getting the RRoD. You'll just have to try and bear it until you can get a new console.

JCSWW

That's the issue right there, Prezdead! My TV auto detects the resolution being put out by the source and sets it accordingly. There is no way to set my TV's HDMI input to display a certain resolution regardless of what the source is putting out. My Android
box and Roku 4 put out a 4k signal when I enable the resolution they should output is 4k. Unfortunately, The XBOX One S doesn't seem to do that.

When I do the video test on the XBOX One. My TV doesn't even flicker. It just pops up that it failed everything, which is incorrect. If I change the resolution on the XBOX One S to 720p, then it flickers and my TV changes the display to 720p. If I change
the XBOX One S to display 1080p, then the TV flickers and changes the resolution to 1080p. If I try to change the XBOX One S to display UHD, it does nothing other than go instantly to the failed screen, which states none of the options are supported. Under
Advanced Video Settings though, I have 24Hz, 50Hz, and UHD 4k checked. the problem is, the XBOX One S is putting out the 4k signal because the test says the TV fails everything and the TV will not disaply in 4k until the TV receives a signal from the XBOX
One S to display in 4k.

Xbox One S Display problems