Xbox one s beeps and no signal?

Hi, I hope you're doing great out there. I am an Independent advisor and I am here to help you in regard to your concern.

We may need to reset the internal power supply by following the steps below:

"1. Unplug the mains lead from the console.

2. Wait 10 seconds.

3. Plug the cord back into the console, and then press the Xbox button on the front of the console."

If your console is connected to a power strip or surge protector make sure to plug it now into the wall socket.

Also, if you an use a different TV or HDMI cable that would be great.

On my xbox one s, it makes a low beeping sound, it never did this before. My tv screen remain blank and tells me theres no signal. Ive tried a new hdmi cord and its plugged in the rights spots. Can i get some help plz

Hello Martin,

Sorry for the issue with no signal. Well we know it is not the console as it works on another TV. Have you tried different HDMI ports on the TV that has no signal? Also in the guide there is a section to reset display settings to default.

Reset your display settings. Here's how:

1. If there's a disc in the Xbox One console, eject it.
2. On the console, press and hold the Xbox button for five seconds to turn off the console.
   
3. Press and hold the Xbox button and the Eject button until you hear a beep to turn on the console. You will hear one beep right away and a second beep 10 seconds later. The power light will flash on before the second beep.
   DO NOT LET GO until the second beep occurs.

Try these let us know.

Brad

yes, i can hear the first and second beep but still no signal.

Hi, Kaden! Thank you for reaching out.
I'm AJ, an Independent Advisor for the Xbox Community.
I'm sorry you are experiencing issues with your video signal.

• Would you mind giving this a try?

- If there's a disc in the console, eject it.

- Press and hold your console's power button until it shuts down.

- While the console is off, press and hold the power button and the EJECT button until you hear a beep to turn on the console. You’ll hear one beep right away and a second beep 10 seconds later. The power light will flash on before the second beep. Do not let go until the second beep occurs.

* If you have an All-digital Xbox One S or an Xbox Series S, you'll need to use the BIND button instead of EJECT.

----

• If that doesn't work, I'd appreciate your answering the following questions:

- May I ask which Xbox model you are using?

- Do you, by any chance, have a different HDMI cable you could try with your console?

- Have you already tried using a different HDMI port on your current TV/monitor, or a different TV/monitor altogether?

----

Thank you! I'll be looking forward to your reply.
Best regards.