Xbox One not booting

PolestarAE · Mar 1, 2022

I have an Xbox One that is about eight years old. I came home yesterday and found that the Xbox was on and on the sign-in screen. I selected my profile and waited about two minutes for it to sign me in, but it couldn't get past the loading animation (Signing you in...) I powered it off by holding the Xbox button down since it wouldn't respond to controller input or single taps and turned it back on. Same problem, tried again. Now the Xbox turns on, but I don't have any signal on the TV, nor will it respond to synch prompts or tapping of the power button. My controller is also unable to connect to it.

Tried putting a disc in, pressing random buttons, power cycling, nothing is working. Can someone help me out?

:)

SatanicoDrCadillac

Hi!

I hope this helps

https://support.xbox.com/en-US/xbox-one/console/system-updates-solution

Georges C.

Hello, first it's a pleasure to be able to help you today.

My name is welcome to the community.

Hello PolestarAE, your console is plugged into some type of electrical stabilizer or directly the electrical outlet, ideally it is directly in the outlet.

As you say your Xbox turns on but doesn't pass signal, try changing the HDMI cable or even experimenting on another TV or monitor.

And if it calls but stays on a black screen, try following this procedure.

Bind Eject Xbox One

Turn off the console and unplug the power cord to ensure that the console is completely turned off.

Wait 30 seconds and plug the power cord back in.

Hold down the BIND (located at the bottom front of the console) and EJECT (located on the front of the console) and press the Xbox button on the console.

NOTE: Bind is the pairing button of the control.

Continue by pressing the BIND and EJECT buttons for 10 to 15 seconds.

Listen to the two tones of "activation", with a few seconds of difference between them.

Release the BIND and EJECT buttons after the second activation tone.

If your console is the Xbox One S All-Digital Edition, it doesn't have the EJECT button. You can turn on Xbox Startup Troubleshooting on this console by keeping only the BIND button and then pressing the Xbox button.

When you're on the recovery screen, choose the "Reset while keeping games and Apps" option.

Note

-You need to know the email and passwords of your accounts when performing this reset.

-No data or game save will be lost doing this, everything is done in backup to the cloud servers.

If it does not return to normal after this procedure, proceed with an offline update.

Perform an offline system update

https://support.xbox.com/en-us/help/hardware-ne...

AquarrzSudnnym

"I've tried the USB factory reset, along with the Sync/Eject shortcut with the exact same results. The error that keeps coming up is (E102 10040C02 80004005). E102 is a failure to boot/ error when booting up, hence the previous troubleshooting."

If you are in a Insider preview, you cannot use USB factory reset, (OSU) unless you unenroll from the preview first.

E102 error generally means the hardware is failing and you will need to setup a repair if you can't get to the troublshooting screen when you boot up.

M3tal Daz3

Are you part of the Insider program? If so you should post this issue at the xbox Insider reddit page for support

Redclayplayzz

Oh because i seen red,blue,purple xbox 360 boot screens and blue xbox one boot screen...

Xbox One not booting