xbox one kinect power down issue detected

Discus and support xbox one kinect power down issue detected in XBoX on Consoles to solve the problem; I've been noticing that my kinect sensor has not been powering down when I send a shutdown command to the system when i am done using it, the sensor... Discussion in 'XBoX on Consoles' started by XLHUNTER206, Jun 5, 2016.

  1. XLHUNTER206
    XLHUNTER206 Guest

    xbox one kinect power down issue detected


    I've been noticing that my kinect sensor has not been powering down when I send a shutdown command to the system when i am done using it, the sensor stays on and the xbox logo still illuminates on the sensor itself, there is no need for a repair as for unplugging
    it will likely fix this issue however i'd like to know why can this be? is there an issue? will another system update fix this? is there need for repair? < probably most unlikely. feedback will be greatly appreciated...

    :)
     
    XLHUNTER206, Jun 5, 2016
    #1
  2. welsman13
    welsman13 Guest
    Is the 360 your fave?

    xbox hands down. online is easier to navigate and the kinect is the best motion detection
     
    welsman13, Jun 5, 2016
    #2
  3. Mister Cerb
    Mister Cerb Guest
    XBox One - Power Down Issue

    Hey there Excalibur! Let's see what we can do to get things sorted.

    To start off, I suggest giving these shut down options a try:

    • Use the "Xbox, Turn Off" voice command.
    • Press and hold the Home button on your controller.
    • Press the power button on your console.
    • Press and hold the power button on your console for 5-10 seconds until the console powers off.

    Let us know how those go and whether or not you're able to power your console off without issues. We'll be satnding by to hear back from you! ^_^
     
    Mister Cerb, Jun 5, 2016
    #3
  4. daneyul Win User

    Xbox Skype Kinect camera being used by another application

    Make very sure you're in the right USB port if you have an Xbox One without a dedicated Kinect port (like an Xbox One S or Xbox One X)!

    The Kinect--even though it has a power adapter--needs consistent voltage in its USB connection too, and only the USB port on the Xbox labeled "Kinect" provides it (that's the port closest to the HDMI I believe.) A POWERED USB hub may work too.

    But... plugging the Kinect into one of the other two USB ports--or a non-powered USB hub--will cause problems -- either a warning to plug it in the right port... or intermittent connection issues... or a failure to be detected at all.
  5. tplarkin7 Win User

    Xbox On/ Xbox Turn Off does not power on off the television

    Short story:

    Let Xbox auto-detect, then reboot the console. (Power the Xbox One off by holding the power button for 5 seconds. Wait 60 seconds and then power it back on.)

    Long story:

    (A) I let Xbox detect my TV automatically, which allowed me to control volume/mute by voice, but failed to power on/off devices.

    (B) After enabling the settings to turn on and turn off the TV and cable box, it turned devices off with the Kinect command "Xbox Turn Off". But, it failed to turn the devices on with "Xbox On".

    (C) Settings/TV and OneGuide would not load and gave me a time-out error code (too lazy to write it down).

    (D) I rebooted the system by powering down (holding power button for 5 secs).

    (D) When I powered up, everything powers on/off properly. (I have some issues with the cable box, not sure if it's line-of-sight problem.)

    My TV is a Sanyo DP46841 and the remote code is T1362.
  6. Mister Beep Win User

    Two Issue Kinect and Messages Disappearing

    Hey SenseiMoro!

    I just added the role for you to access and post in the Preview Program Support forum, go ahead and post over there to request to have the code resent.

    As for the Kinect issue, let's start with these steps below!

    • Press and hold the power button on your Xbox One console for 10 seconds, or until the unit fully powers down.
    • Once the device is powered down, unplug the Kinect and the power cable from the Xbox One console for 5 minutes.
    • After the 5 minutes are up, plug both the Kinect sensor and the power supply back into the Xbox One console and see if the issue persists!
    If the Kinect issue persists, please post back and let us know so we can dig a little deeper! Hope you get that invite back soon! :)
  7. dopey360 Win User

    i think my Kinect is messed up

    A few things that helped me with a similar situation was shutting down the console by holding the power button on the console for about 10 seconds. Unplug everything from the back wait a few seconds plug everything in except the kinect. Turn console on>go
    to settings>kinect>then plug kinect in. After console detects kinect calibrate it again with your tv/surround audio adjusted to one of the loudest settings you will ever use.
  8. jayfish Win User

    Screen goes dim while watching tv

    So, I may have found a workaround. This workaround may not apply to all causes of this issue. For me, I think what is going on is that the XBOX one uses the cameras on the Kinect to detect activity in the room. If it doesn't detect activity is dims the screen.
    My Kinect is defective so occasionally locks up or errors out. The XBOX one sees the Kinect but the Kinect doesn't see anything so doesn't detect any activity in the room no matter what. I got tired of dealing with it so I just unplugged the Kinect. Since
    the Kinect has been unplugged, no screen dimming. Good luck if you choose to try this and remember; this is a workaround and not a fix. YMMV.
Thema:

xbox one kinect power down issue detected

Loading...

  1. xbox one kinect power down issue detected - Similar Threads - kinect power down

  2. Kinect wont power xbox on, but works for all other commands.

    in XBoX on Consoles
    Kinect wont power xbox on, but works for all other commands.: My kinect will not power my xbox on, but all of the other voice commands work including the power off command. I disabled Cortana as well. Does this have something to do with it?...

  3. Kinect not holding power

    in XBoX on Consoles
    Kinect not holding power: We have an older Kinect and a new Xbox One X, connected with an adapter. The Kinect turns on with the console, but stops working after only minutes. It also randomly powers back up, as if it went...

  4. Power Supply Adapter Cable for Xbox 360 Kinect Sensor

    in XBoX on Consoles
    Power Supply Adapter Cable for Xbox 360 Kinect Sensor: Where can I find a Power Supply Adapter Cable for Xbox 360 Kinect Sensor? 351c8f5c-e0dd-487e-bedb-7eb002be98e3

  5. Why does my Kinect randomly power down?

    in XBoX on Consoles
    Why does my Kinect randomly power down?: There seems to be no rhyme or reason to it, my Kinect will lose power. Sometimes all of the lights, sometimes only the infrared. Does this happen because Microsoft changed the software to...

  6. xbox 360 kinect faulty power supply or camera

    in XBoX on Consoles
    xbox 360 kinect faulty power supply or camera: hi all just wondering does the LED on the power supply of the xbox 360 kinect light up even without the camera plugged in? im trying to determine whether my power supply has blown or the camera...

  7. Xbox 360 w/ Kinect Power Supply

    in XBoX on Consoles
    Xbox 360 w/ Kinect Power Supply: Anyone, please help. We got our console last march 21 at a mall in the philippines. our child accidentally plugged it to 220v. Initially, they saw the console and tv on but the console quickly...

  8. Kinect sensor insufficient power error

    in XBoX on Consoles
    Kinect sensor insufficient power error: Hi, I'm setting up my xbox 360. It's run updates and is saying calibrate kinect audio but when I select I get an error saying there's insufficient power to the sensor but it's all plugged in and...

  9. kinect has no power,bricked?

    in XBoX on Consoles
    kinect has no power,bricked?: have no power to kinect sensor, no light on front. tried acouple hard resets but nothing. think it is ***, anyone else having this issue ? c99227b7-fd6e-4ca7-ad67-1c3c600b923c

  10. Does the xbox 360's Kinect still scan up/down when you power on the console?

    in XBoX on Consoles
    Does the xbox 360's Kinect still scan up/down when you power on the console?: Was just wondering if the xbox 360's kinect scans up/down on power up or not. I don't think the motors in mine are broken because I can still move it up/down via the calibration screen - but I...