Xbox one keeps signing me out of my account and disconnecting everything every few minutes...

Hey BuBoNiC PlaGuE3! Are you getting any kind of error message or code when it disconnects you? Post back and let me know!

nah no codes nothing just constant disconnecting now it don't sign me out as much but no online play after a minute .. network test again and still nothing

since the fall dashboard update i keep getting disconnected but have a good connection it happens every 10 minutes just sudden lag then signed out it has also signed my full account out and it is rlly annoying when i spent alot on the GoW3 xbox

I'm able to sign in, but I keep getting disconnected every 15 minutes or so. It's been like this for the past couple days. My Xbox One is perfectly fine, though.

To be honest, a wireless bridge is the only thing you'd WANT to use this router for. Even with the excellent DD-WRT firmware, this item is a poor choice as a router. Why? Because the range of this router is just terrible. And that applies not
only to the 5Ghz "N" band (which has more limited range on all routers), but also to the standard 2.4Ghz B/G/N band. The range of this router is not ideal on any band. And that's a big problem for a wireless router. If you are replacing an older "G" wireless
router that has served you well, but which you feel is getting a bit long in the tooth (and you want that newfangled "N" band you've been hearing about), this is most certainly NOT the router for you. You will most certainly be disappointed with the range
compared to any decent "G" router.

The wireless router wireless settings need to be configured and the the wireless card in the computer and XBOX needs to be configured with the Netgear wireless settings.

Follow these steps

1. Connect the wireless router to your computer with a LAN cable.

2. Start your browser and enter the router's configuration URL

3. Enter the router setup login and password

4. Change the admin password

5. Go to the wireless settings and change the default SSID and turn off SSID broadcast.

6. Setup encryption key the strongest is WAP2

7. For further security measures - turn on MAC address filtering and enter the MAC address of the wireless cards on the computer/s you want to connect to this wireless router.

8. Record the settings you have made and keep it in a safe place and Save the settings.

9. Configure the wireless cards on the computer/s with the SSID and encryption settings of the router.

10. Remove the LAN cable between the router and the computer then the computers should be able to connect to the router.