[XBOX ONE: In my configuration is open but in the menu of any is moderate]

Z4 Y DC · Apr 16, 2017

Mi XBOX ONE esta conectada con cable y antes abria la NAT con DMZ, ya que abriendo los puertos me sigue siendo cosa imposible, y cuando por fin esta abierta en la configuracion de la consola, al poner cualquier otro juego multijugador sigue moderada. ¿Por
que abriendo todos los puertos no hace efecto? ¿Y por que en DMZ solo esta abierta en la consola pero no en juegos?

[Translation]

My XBOX ONE is connected with cable and before opening the NAT with DMZ, since opening the ports is still impossible, and when it is finally open in the configuration of the console, to put any other multiplayer game is still moderate. Why opening all ports
does not work? And why is DMZ only open in the console but not in games?

:)

djabrutekillerz · Apr 16, 2017

Connected to the internet, but only partially to Xbox Live.

I'm pretty sure I set up the DMZ right, but it didn't work much.

I enabled it and switched the IP in the router menu to the one on my Xbox's configuration menu. (automatic configuration; 192.168.1.100)

It's an improvement, because it's moderate instead of strict, but I want it to be open. And I don't know what I did wrong, or just didn't do altogether.

Snipercia1 · Apr 16, 2017

Ipv6 not connecting wirelessly

You can check for open NAT from Settings, Network and in that menu it will show if you are open, moderate, or strict. sometimes nat issues can be corrected by following the following link

support.xbox.com/.../nat-error-solution

As for the IPv6, xbox currently uses only IPv4 and the usual fix is to access your router configuration page and disable IPv6.

Miss Bijoux · Apr 18, 2017

Hey there Z4!

Have you tried disabling DMZ and opening the
ports suggested by Activision for Call of Duty? I know the link is in the Ghosts section but they should be the same across the board.

Try that and see what kind of NAT you have in Advanced Warfare then. Let us know how it goes!

--------------------------------------

Xbox Forums Staff

Be sure to check out the Xbox Forum Guidelines and
if you're a member of the Xbox Insider Program, check out the Xbox Insider Program Forums for help with Insider Program
troubleshooting.

Miss Bijoux

Hey there Z4!

Have you tried disabling DMZ and opening the
ports suggested by Activision for Call of Duty? I know the link is in the Ghosts section but they should be the same across the board.

Try that and see what kind of NAT you have in Advanced Warfare then. Let us know how it goes!

--------------------------------------

Xbox Forums Staff

Be sure to check out the Xbox Forum Guidelines and
if you're a member of the Xbox Insider Program, check out the Xbox Insider Program Forums for help with Insider Program
troubleshooting.

djabrutekillerz

I'm pretty sure I set up the DMZ right, but it didn't work much.

I enabled it and switched the IP in the router menu to the one on my Xbox's configuration menu. (automatic configuration; 192.168.1.100)

It's an improvement, because it's moderate instead of strict, but I want it to be open. And I don't know what I did wrong, or just didn't do altogether.

Snipercia1

You can check for open NAT from Settings, Network and in that menu it will show if you are open, moderate, or strict. sometimes nat issues can be corrected by following the following link

support.xbox.com/.../nat-error-solution

As for the IPv6, xbox currently uses only IPv4 and the usual fix is to access your router configuration page and disable IPv6.

Bi9Daddy61

Yes, but on that subject, on my XB1 Test NAT menu selection acts like a switch sometimes. Open becomes Moderate if I check NAT, and Moderate becomes Open. Is that by design?

Jeremy2085

To get an open or moderate nat nype try testing the nat type on the network settings menu of the xbox.

[XBOX ONE: In my configuration is open but in the menu of any is moderate]